آرماتور فولاد گالوانیزه
Galvanized steel reinforcement
چکیده
خوردگی آرماتورهای فولادی در بتن مسئله ای جدی است که به دوام و پایداری طولانی مدت و کارآیی سازهی بتنی آسیب میرساند. خوردگی آرماتور نتایج مهمی را در رابطه با طول عمر قطعات یا سازه ها به همراه دارد که میتواند بر حساسیت پروژه نسبت به محیط و در نتیجه ارزش اقتصادی آن تأثیر بگذارد.
از آنجایی که فراهم کردن بتنی با کیفیت خوب جهت حصول اطمینان از دوام و پایداری بتن و محافظت از آرماتور الزامی است، آرماتورهای فولاد گالوانیزه (یعنی با پوشش روی) میتوانند در صورت انتخاب مواد نامناسب و یا کیفیت ساخت ضعیف، فولاد را در برابر خوردگی محافظت کرده و طول عمر آن را افزایش دهند. از زمان اولین گزارشات منتشر شده در این باره (دهه ی ۱۹۳۰)، آرماتورهای گالوانیزه به طور گستردهای در انواع سازه های بتنی و تحت شرایط خورنده متوسط، شدید و ضعیف مورد استفاده قرار گرفته اند (بیش از ۴۰- ۵۰ سال).
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
The corrosion of steel reinforcement in concrete is a worldwide problem that impacts the long-term durability and serviceability of concrete construction. Should the reinforcement corrode, this may have serious consequences on the longevity of the component or structure that in turn affect the environmental sustainability of a project as well as its economic viability.
While the provision of good-quality concrete is fundamental to ensuring the adequate durability of concrete and primary protection of the reinforcement, the galvanizing of reinforcement (i.e. coating with zinc) provides additional corrosion protection to embedded steel in the event of a lack of durability of the concrete due to inappropriate materials choices and/or poor workmanship and site practices, and also where a long maintenance-free life is required. From its first reported use in the United States in the 1930s, galvanized reinforcement has been widely used, especially so over the last 40e50 years, in many types of concrete construction in a variety of mild, moderate and aggressive exposure conditions.
محصولات مرتبط
اثر میکروساختار ماده بر فرسایش ابزار هنگام ماشینکاری آلیاژهای سخت تیتانیوم
ماشین کاری آلیاژ تیتانیوم Experimental investigation on the effect of the material microstructure on tool wear when machining hard titanium alloys:…
اتصال Inconel 625 به UNS 32205 به روش جوشکاری پرتو الکترونی
Investigations on the structure – Property relationships of electron beam welded Inconel 625 and UNS 32205 بررسی روابط خواص-ساختار اتصال…
اثر گرافیت بر اکسیداسیون ZrB2-SiC در هوا
The effect of a graphite addition on oxidation of ZrB2–SiC in air at 1500 ◦C اثر گرافیت بر اکسیداسیون ZrB2-SiC…
اطلس عیوب ریخته گری
اطلس عیوب ریخته گری عیوب ریخته گری از گذشته در قطعات باعث بحران بوده اند و مهم ترین وظیفه ریخته گران…
155,500 تومان قیمت اصلی 155,500 تومان بود.77,900 تومانقیمت فعلی 77,900 تومان است.
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.