Electroheological Materials
مواد دارای تغییر شکل در اثر الکتریسیته
(مواد الکتروهولوژیکی)
ABSTRACT
The electroheological effect refers to the abrupt change in viscosity in certain colloidal sols when subjected to an electric field . The phenomenon of electroheology (ER) was first reported by w . M. Winslow in 1947 and therefor is also known as the Winslow effect . An ER fluid changes is flow characteristics ( due to the viscosity changes ) in the presence of a high voltage low current electric field and if the strength of the electric field is sufficient the fluid behaves much like a solid . The adaptive response of an ER fluid ( which takes only milliseconds )is in the from of progressive gelling which is proportional to the field strength . In the absence of electric field the fluid flows freely like water .
جهت دانلود رایگان نسخه لاتین این مقاله اینجا کلیک کنید .
چکیده
اثرات تغییر شکل الکتریکی مربوط به تغییر ناگهانی در ویسکوزیته در سل های کلوئیدی خاص هنگامی است که در معرض یک میدان الکتریکی قرار می گیرند. پدیده تغییر شکل الکتریکی ابتدا توسط W.M.Winslow در ۱۹۴۷ بیان شد و لذا به عنوان اثر وین اسلو نیز شناخته می شود. یک سیال ER مشخصات سیلان خود را در حضور یک میدان الکتریکی با جریان کم، ولتاژ بالا، تغییر می دهد و اگر استحکام میدان الکتریکی کافی باشد، سیال بیش تر شبیه به یک جامد عمل می کند. پاسخ یک مایع ER (که در حد چند میلی ثانیه است) به شکل ژن پیشرونده ای است که متناسب با استحکام میدان می باشد. در غیاب میدان الکتریکی، سیال (مایع) به طور آزادانه مانند آب حرکت می کند .
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
محصولات مرتبط
کارسختی Work Hardening
Work Hardening کارسختی ABSTRACT Work hardening is one of the characteristic properties of most metallic alloys; it isalso probably the…
زیرکونیا Zirconia
Zirconia زیرکونیا ABSTRACT Zirconia is a very important industrial ceramic for structural applications because of its high toughness, which has…
چاپ سه بعدی کامپوزیت کربن-کربن Three dimensional printing of carbon-carbon composites
Three dimensional printing of carbon/carbon composites by selective laser sintering چاپ سه بعدی کامپوزیت کربن/کربن توسط زینتر لیزر انتخابی ABSTRACT A…
عملیات حرارتی فصل مشترک اتصال در جوشکاری انفجاری فولاد زنگ نزن/مس
Effect of heat treatment on bonding interface in explosive welded copper/stainless steel اثر عملیات حرارتی روی فصل مشترک اتصال در جوشکاری…
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.