Hardness of Tempered Martensite in Carbon
and Low-Alloy Steels
سختی مارتنزیت تمپرشده در فولادهای کربنی و کم آلیاژی
ABSTRACT
This paper presents the results of a systematic study of the effect of carbon, manganese, phosphorus, silicon, nickel, chromium, molybdenum, and vanadium on the hardness of martensite in low to medium carbon steels tempered for one hour at 100~ (56~ intervals in the range 400 to 1300~ (204 to 704~ Results show that the as-quenched hardness depends solely on carbon content. On tempering, the effect of carbon on hardness decreases markedly with increasing tempering temperature. Studies of carbon-0.5 manganese steels showed that the incremental increase in hardness from 0.5 pct manganese after a given tempering treatment was independent of carbon content. Based on this result, studies of the effects of the other alloying elements were made using a 0.2 or 0.3 pct carbon, 0.3 to 0.5 pct manganese steel base composition. The hardness of the resulting tempered martensite was assumed to be due to a given alloy addition, and when two or more alloying elements were added, their effects were assumed to be additive.
جهت دانلود رایگان نسخه لاتین این مقاله اینجا کلیک کنید .
چکیده
این مقاله، نتایج یک مطالعه اصولی درباره اثر کربن، منگنز، فسفر، سیلیسیم، نیکل، کروم، مولیبدن و وانادیم را بر سختی مارتنزیت در فولادهای کم کربن تا کربن متوسط تمپر شده برای یک ساعت در فواصل °F 100 (°C 56) در محدوده °F 1300-400 (°C 704-204) ارائه می دهد. نتایج نشان می دهد که سختی حالت کوئنچ شده، فقط به درصد کربن وابسته است. در تمپرکردن، اثر کربن بر سختی بطور محسوسی با افزایش دمای تمپر کاهش می یابد. مطالعه بر فولادهای کربنی با نیم درصد منگنر نشان داد که افزایش تدریجی در سختی از ۵/۰ درصد منگنز، پس از یک عملیات تمپرینگ معین، مستقل از مقدار کربن بود. بر اساس این نتیجه، مطالعه اثرات سایر عناصر آلیاژی با استفاده از ترکیب پایه فولادی با ۲/۰ یا ۳/۰ درصد کربن و ۳/۰ تا ۵/۰ درصد منگنز انجام گردید. فرض شد که سختی مارتنزیت تمپرشده حاصل، بدلیل یک افزودنی آلیاژی معین باشد و هنگامی که افزوده شدند، فرض شد که اثرات آنها فزاینده باشد.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
محصولات مرتبط
نقایص جوشکاری Welding Defects
Welding Defects نقایص جوشکاری ABSTRACT Melting rate (resulting from selected welding parameters) and welding speed define the heat input. As it…
کارسختی Work Hardening
Work Hardening کارسختی ABSTRACT Work hardening is one of the characteristic properties of most metallic alloys; it isalso probably the…
عملیات حرارتی فصل مشترک اتصال در جوشکاری انفجاری فولاد زنگ نزن/مس
Effect of heat treatment on bonding interface in explosive welded copper/stainless steel اثر عملیات حرارتی روی فصل مشترک اتصال در جوشکاری…
رفتار سینترینگ و خواص دی الکتریکی سرامیک ها Sintering behavior and dielectric properties of BaTiO3 ceramics
Sintering behavior and dielectric properties of BaTiO3 ceramics with glass addition for internal capacitor of LTCC رفتار سینترینگ و خواص دی…
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.