نانوکامپوزیت عایق صدا بر پایهی کامپوزیتهای اپوکسی-نانوتیوبهای سیلیکای توخالی
Novel sound insulation materials based on epoxy-hollow silica nanotubes composites
چکیده
عملکرد ماده عایق صدا به شدت وابسته به تکنولوژی ساخت آن میباشد. در این مطالعه، ما نانو تیوبهای سیلیکای توخالی (HSNTها) را سنتز کرده و از آنها به عنوان پرکننده برای ساخت یک نانوکامپوزیت عایق صدا بر پایهی اپوکسی استفاده کردهایم. میزان هدر رفت عبور صدا (STL) این نانو کامپوزیتها با استفاده از یک تیوب موج چهار میکروفونی اندازهگیری شد. نتایج نشان داده است که برای نمونههای با ضخامت ۳ میلیمتر، مقادیر STL رزین اپوکسی خالص و نانو کامپوزیت حاوی ۳% وزنی HSNT به ترتیب برابر ۱۷ و ۴۳ دسی بل بوده است. با افزایش ضخامت نانو کامپوزیت تا ۱۰ میلیمتر، مقدار STL به dB 9/57 میرسد. این بهبود عایق بودن در نانو کامپوزیتها، ناشی از ساختاز ویژهی توخالی نانو تیوبهای سیلیکا میباشد. خواص مکانیکی و پایداری حرارتی نانو کامپوزیتها نیز با افزودن HSNTها در زمینهی اپوکسی بهبود یافت.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
The performance of a sound insulation material is highly dependent on the technology adopted for its construction. In this study, we synthesized the hollow silica nanotubes (HSNTs) and used them as functional fillers to fabricate a sound insulation nanocomposite based on the epoxy. The sound transmission loss (STL) values of the nanocomposites were measured using a four-microphones standing wave tube.
The results showed that for samples with thickness of 3 mm, the STL values of the pure epoxy resin and of nanocomposites with 3 wt% of HSNTs loading were 17 dB and 43 dB, respectively. When the thickness of the nanocomposite increased to 10 mm, the STL value increased to 57.9 dB. The improved sound insulation performances of nanocomposites have been attributed to the unique hollow structure of the hollow silica nanotubes. The mechanical properties and the thermal stability of the nanocomposites were also improved by adding HSNTs into the epoxy matrix.
محصولات مرتبط
انجماد جهتدار آلیاژهای آلومینیوم – مس Directional solidification of aluminium–copper alloys
Directional solidification of aluminium–copper alloys انجماد جهتدار آلیاژهای آلومینیوم-مس ABSTRACT Directional solidification experiments have been carried out on different Al–Cu…
انتخاب پوشش Coating Selection
Coating Selection انتخاب پوشش ABSTRACT An improved approach to coating selection should thus allow progressive elimination and lend itself to a…
بیومواد آلومینای چقرمه شده با زیرکونیا برای جایگزین مفصل
Advances in zirconia toughened alumina biomaterials for total joint replacement پیشرفت ها در بیومواد آلومینای چقرمه شده با زیرکونیا برای…
اثر اندازه نمونه بر ریزساختار و انجماد جهت دار فاز بین فلزی Al2Cu
Effect of sample size on intermetallic Al2Cu microstructure and orientation evolution during directional solidification اثر اندازه نمونه بر ریزساختار فاز…
90,500 تومان قیمت اصلی 90,500 تومان بود.45,500 تومانقیمت فعلی 45,500 تومان است.
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.