بررسی های دیلاتومتری تبدیلات فازی در طول گرمایش و سرمایش فولاد پرکربن غیرآلیاژی سخت شده
Dilatometric investigations of phase transformations at heating and cooling of hardened, unalloyed, high-carbon steels
چکیده
هدف: دلیل نگارش این مقاله توضیح سینتیک تبدیلات فازی در طول گرمایش پیوسته از حالت سخت شده و سرمایش بعدی فولاد پرکربن غیرآلیاژی بود.
طراحی/روش شناسی/رویکرد: بررسی های دیلاتومتری با استفاده از دیلاتومتر DT 1000 ساخت شرکت فرانسوی Adamel اجرا شدند. نمونه ها پس از کوئنچ کردن و کوئنچ برودتی در نیتروژن مایع ( ۱۹۶-) تا دمای ۷۰۰ با نرخ /s 05/0 حرارت داده شدند و سپس تا دمای اتاق با نرخ /s 05/0 سرد شدند.
یافته ها: با وجود حرارت دهی فولاد پرکربن سختشده تا ۷۰۰، کسر کوچکی آستنیت باقیمانده در ساختار آن باقی ماند و تنها در طول سرمایش در محدودهی دمایی ۱۷۰- ۲۸۰ به مارتنزیت تازه تبدیل شد.
محدودیت ها/پیامدهای پژوهش:نمایش شماتیک منحنی تفاضلی تمپرکردن فولاد غیرآلیاژی پرکربن سخت شده نشان می دهد که تبدیلات فازی در طول گرمایش از حالت سخت شده اتفاق می افتند.
پیامدهای عملی: مشاهده ی این که کسر کوچکی آستنیت باقیمانده در ساختار فولاد پرکربن تمپر شده باقی مانده است نشان میدهد که حتی فولاد غیرآلیاژی باید دو بار تمپر شود.
اصالت/ارزش: توضیحات دقیق سینتیک تبدیلات فازی در طول گرمایش از حالت سخت شده ی فولاد پرکربن غیرآلیاژی.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
Purpose: The reason for writing this paper was to describe the kinetics of phase transformations during continuous heating from hardened state and subsequent cooling of unalloyed high carbon steel.
Design/methodology/approach: Dilatometric investigations were performed using a DT 1000 dilatometer of a French company Adamel. Samples after quenching and quenching and sub-quenching in liquid nitrogen (-196 °C) were heated up 700 °C at the rate of 0.05 °C/s and subsequent cooled to room temperature at the rate of 0.05 °C/s.
Findings: Regardless of heating the hardened high-carbon steel to 700 °C, a small fraction of the retained austenite remained in its structure, and was changing into fresh martensite only during cooling in the temperature range: 280°C-170°C.
Research limitations/implications: Schematic presentation of the differential curve of tempering of the hardened high-carbon, unalloyed steel illustrating the phase transformations occurring during heating from hardened state.
Practical implications: An observation, that a small fraction of the retained austenite remained in the structure of tempered high-carbon steel, indicates that even unalloyed steel should be tempered two times.
Originality/value: Detailed descriptions of kinetics phase transformations during heating from hardened state of unalloyed high carbon steel.
محصولات مرتبط
اثرات آنتی باکتریال فلزات Antibacterial effects of metals
اثرات آنتی باکتریال فلزات Antibacterial effects of metals اثرات آنتی باکتریال فلزات ABSTRACT In this chapter, the antibacterial effects of…
اهمیت خوردگی در خطوط ساحلی نفت و گاز corrosion in onshore oil and gas pipelines
Assessing the significance of corrosion in onshore oil and gas pipelines ارزیابی اهمیت خوردگی در خطوط ساحلی نفت و گاز…
انتخاب پوشش Coating Selection
Coating Selection انتخاب پوشش ABSTRACT An improved approach to coating selection should thus allow progressive elimination and lend itself to a…
انجماد جهت دار سوپرآلیاژهای پایه نیکل
Effect of solidification rate on competitive grain growth in directional solidification of a nickel-base superalloy انجماد جهت دار سوپرآلیاژهای پایه…
117,200 تومان قیمت اصلی 117,200 تومان بود.46,800 تومانقیمت فعلی 46,800 تومان است.
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.