طراحی بهینه شده یک قالب ECAP با استفاده از روش المان محدود برای دستیابی به مواد نانوساختار
Optimized Design of an ECAP Die Using the Finite Element Method for Obtaining Nanostructured Materials
چکیده
یک آلیاژ Al6060 تحت تغییر شکل پلاستیک شدید قرار گرفته است تا رفتار آن با روش المان محدود FEM مطالعه شود. برای انجام این پروژه ۶ شکل مختلف برای طراحی قالب ECAP مورد استفاده قرار گرفته شده است تا فرآیند را بهینه کنند تا دستیابی به مواد نانوساختار پیدا کنند. با استفاده از شبیه سازی FEM، امکان دارد که همگنی در تغییر شکل را در شرایط مختلف برای تغییر شکل مستقیم با ECAP مطالعه کرد، از جمله این شرایط ضریب اصطکاک، سرعت اکستروژن، هندسه کانال قالب می باشند.
به این دلیل که کرنش کششی در بالای نمونه های استوانه ای واقع شده است، در حین ECAP شکست و تمایل به ترک خوردن داریم، که برای حل این مشکل و حذف کرنش کششی می توان روی نمونه ها تنش فشاری ایجاد کرد و تمایل به ترک و شکست را در نمونه های ECAP کاهش داد. آنالیزهای FEM نشان می دهند که حالت کرنش به صورت زیادی با تغییر تنش از کششی به فشاری در قالب بهبود یافته تغییر می کند و فرآیند ECAP به راحتی انجام می گردد.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
An alloy type A16060 was exposed to severe plastic deformation to study its reaction using the finite element method (FEM). To perform this, six different configurations were used in the design of the die’s channel for ECAP (equal channel angular pressing) to obtain nanostructure materials and to optimize the process. Thanks to simulation performed with FEM, it is possible to study the homogeneity in the deformation due to the variation of conditions affecting directly the material being processed using the ECAP technique, such as the friction coefficient, extrusion speed, and mainly the die’s channel geometry being utilized.
in the ECAP process. Due to the tensile strain area being located mainly in the upper part of the deformed test cylinder (plastic deformation area) which increases the fracture and cracking tendency preventing the processing through ECAP the die being utilized was modified to eliminate the tensile strain area favoring the appearance of compressive stress which reduces the cracking tendency and the fracture of the sample being processed. The FEM analysis demonstrated that the strain state changed significantly from tension to compression when the modified die was used, facilitating the processing of the piece by ECAP.
محصولات مرتبط
اثر میکروساختار ماده بر فرسایش ابزار هنگام ماشینکاری آلیاژهای سخت تیتانیوم
ماشین کاری آلیاژ تیتانیوم Experimental investigation on the effect of the material microstructure on tool wear when machining hard titanium alloys:…
بهبود فولاد میکروآلیاژی HSLA با وانادیم و تیتانیم
Effect of vanadium and titanium modification on the microstructure and mechanical properties of a microalloyed HSLA steel بهبود فولاد میکروآلیاژی HSLA…
اثر پارامترهای جوشکاری ترمیمی بر عمر قالب های دایکست Die casting moulds
Effect of repair-welding parameters on life time of die casting moulds اثر پارامترهای جوشکاری ترمیمی بر عمر مفید قالب های…
آماده سازی ذرات آلومینای ریزدانه مشتق شده از ژیپسیت بایر Preparation of Fine Alumina Powder
Preparation of Fine Alumina Powder آماده سازی ذرات آلومینای ریزدانه مشتق شده از ژیپسیت بایر ABSTRACT This study involves the…
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.