ریزساختار و خواص اتصال لحیم آلومینیم ۶۰۶۱ با فلز پرکننده Al-Si-Zn
Microstructure and Properties of 6061 Aluminum Alloy Brazing Joint with Al-Si-Zn Filler Metal
چکیده
فلزات پرکننده سه تایی Al-Si-Zn به منظور اتصال لحیم آلومینیم ۶۰۶۱ طراحی شدند. ریزساختار، تشکیل فاز و موفولوژی شکست اتصال لحیم کاری شده مورد بررسی قرار گرفتند. نتایج مشاهدات ریزساختاری تشکیل فاز یوتکتوئید (α(Al)+η(Zn ، محلول جامد (α(Al و نیز ذرات Si در فلز پرکننده را نشان داد. نقاط ذوب این فلزات پرکننده بسیار پایین تر از آلیاژ Al-12Si می باشد.
هنگام استفاده از فلز پرکننده Al-0.2Si-78Zn و Al-2Si-62Zn، محلول جامد (η(Zn) ، α(Al و ذرات Si اولیه در درز لحیم کاری آلومینیم ۶۰۶۱ یافت شدند، درحالی که فاز یوتکتیک Al-Si هنگام استفاده از آلیاژ Al-6.5Si-42Zn یافت شدند. نتایج همچنین نشان می دهد که استحکام کششی اتصالات لحیم کاری شده آلومینیم ۶۰۶۱ با استفاده از فلز پرکننده Al-0.2Si-78Zn، Al-2Si-62Zn و Al-6.5Si-42Zn به ترتیب ۱۰۱، ۱۰۹ و MPa 129 می باشد. مورفولوژی شکست اتصالات لحیم کاری شده بیانگر مد شکست بین دانه ای بودند. درحالی که برخی شکست های درون دانه ای نیز در اتصال به دست آمده توسط فلز پرکننده Al-6.5Si-42Zn یافت شد.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
Ternary Al-Si-Zn filler metals were designed in order to join the 6061 aluminum alloy. The microstructure, phase constitution and fracture morphology of the brazed joint were investigated. Results of the microstructure observation showed that eutectoid α(Al)+η(Zn), α(Al) solid solution, as well as Si particles formed in the filler metal. The melting points of these filler metals are much lower than Al۱۲Si alloy. The η(Zn), α(Al) solid solution, and the primary Si particles were found in the 6061 Al brazing seam when using Al۰.۲Si۷۸Zn and Al۲Si۶۲Zn filler metal, while the AlSi eutectic were found when using Al۶.۵Si۴۲Zn alloy. Results also indicate that the tensile strength of the 6061 Al brazed joints using Al۰.۲Si۷۸Zn, Al۲Si۶۲Zn and Al۶.۵Si۴۲Zn is 101, 109, 129MPa, respectively. The fracture morphology of the brazed joints showed intergranular fracture mode while some transgranular fracture could be found in the joint of Al۶.۵Si۴۲Zn filler metal.
محصولات مرتبط
اثر نیتروژن روی خواص خزشی فولاد زنگ نزن
Evaluation of the effect of nitrogen on creep properties of ۳۱۶LN stainless steel from impression creep tests ارزیابی اثر نیتروژن روی…
انتخاب پوشش Coating Selection
Coating Selection انتخاب پوشش ABSTRACT An improved approach to coating selection should thus allow progressive elimination and lend itself to a…
آلومینات ها Aluminates
Aluminates آلومینات ها ABSTRACT Aluminates form in binary systems with alkali, alkaline earth or rare-earth oxides and share the high…
اثر کار مکانیکی بر ساختار آلیاژ منگنز آلومینیوم Effect Of Prior Working On The Structure Of Mn-29.5% Al-0.5% C ALLOY
Effect Of Prior Working On The Structure and Deformation Capacity Of Mn-29.5% Al-0.5% C ALLOY اثر کار مکانیکی اولیه بر ساختار…
54,500 تومان قیمت اصلی 54,500 تومان بود.21,900 تومانقیمت فعلی 21,900 تومان است.
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.