استحکام آلیاژ Mg (آلیاژ MgY2Zn1) طی فرآیند کشش و ECAP
Optimization of strength by microstructural refinement of MgY2Zn1 alloy during extrusion and ECAP processing
چکیده
آلیاژ MgY2Zn1 شامل زمینه ای از Mg و حدود ۱۹% فاز LPSO است که توسط ریخته گری و عملیات بعدی توسط کشش و فرآیند پرس در کانال های هم مقطع زاویه دار (ECAP) در دماهای بالا تهیه شده است. پس از کشش یک ریزساختار با دانه های کشیده شده در جهت فرآیند کشش ایجاد میشود که در آن فاز LPSO بطور نسبی شکسته شده و زمینه Mg نیز تبلور مجدد نسبی تا اندازه های بسیار ریز داشته است. عملیات ECAP در هر دو حالت آلیاژ ریخته گری شده و تحت کشش منجر به ریزدانه شدن بیشتر توسط تبلور مجدد شده و همچنین تجمع بیشتر ذرات LPSO میگردد. افزایش استحکام آلیاژ Mg با مسیرهای مختلف عملیاتی از لحاظ مشارکت ذرات LPSO و نیز ذرات تغییر شکل یافته و تبلور مجدد شده در زمینه منیزیمی مورد بررسی قرار گرفت.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
A MgY2Zn1 alloy composed of a Mg matrix and about 19% of LPSO phase has been prepared by casting and further processing at high temperature by extrusion and equal channel angular pressing (ECAP). After extrusion an elongated microstructure was obtained in the direction of extrusion where the LPSO phase appears partially broken and the Mg matrix is partially recrystallized to very fine grain size. ECAP processing carried out both in the as-cast and extruded alloy leads to further grain refinement by recrystallization and also to further comminution of the LPSO particles. The increase in strength of the alloy by the different processing routes has been analysed in terms of the contributions from the LPSO particles and the deformed and the recrystallized grains in the magnesium matrix.
محصولات مرتبط
انتخاب پوشش Coating Selection
Coating Selection انتخاب پوشش ABSTRACT An improved approach to coating selection should thus allow progressive elimination and lend itself to a…
اثر کار مکانیکی بر ساختار آلیاژ منگنز آلومینیوم Effect Of Prior Working On The Structure Of Mn-29.5% Al-0.5% C ALLOY
Effect Of Prior Working On The Structure and Deformation Capacity Of Mn-29.5% Al-0.5% C ALLOY اثر کار مکانیکی اولیه بر ساختار…
اتصال نفوذی مس به فولاد زنگ نزن تحت فشار ناگهانی
Impulse pressuring diffusion bonding of a copper alloy to a stainless steel with/without a pure nickel interlayer اتصال نفوذی مس به فولاد…
اثر پارامترهای جوشکاری ترمیمی بر عمر قالب های دایکست Die casting moulds
Effect of repair-welding parameters on life time of die casting moulds اثر پارامترهای جوشکاری ترمیمی بر عمر مفید قالب های…
112,500 تومان قیمت اصلی 112,500 تومان بود.44,900 تومانقیمت فعلی 44,900 تومان است.
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.