تولید پودر مس کروم به روش آلیاژسازی مکانیکی
Preparation of Cu–Cr alloy powder by mechanical alloying
چکیده
مطالعه روی تولید پودر مس کروم به وسیله یک روش جدیدا توسعه یافته (MA) با استفاده از یک آسیاب اصلاح شده انجام گردید. نتایج نشان داد که دمای آماده سازی در تست هایی که از آسیاب اصلاح شده استفاده شد بسیار کمتر از تجهیزات مرسوم بود و هیچ تفاوت مشخصی را در محصولات تولیدشده به وسیله آسیاب های لرزشی و سیاره ای یافت نشد. پودر کربن اکتیو ظرفیت فوق العاده احیایی برای اکسیدهای فلزی نشان داد درحالی که گرافیت برای این فرایند نامناسب بود. بر اساس نتایج آزمایشگاهی، دانه نانومقیاس آلیاژ Cu-Cr خالص شده تولیدشده به وسیله آلیاژسازی مکانیکی را در آسیاب اصلاح شده در ۳۲۵C به مدت ۳ ساعت با جرم گلوله به پودر ۱۵ به ۱ میتوان تولید کرد. پدیده کلوخه شدگی بلوری نیز در پودر آلیاژی نهایی یافت شد که منجر به افزایش اندازه ذره شد.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
A study of Cu–Cr alloy powder preparation by a newly developed mechanical alloying (MA) approach was conducted using a modified mill. Results showed that the preparation temperature was much lower in the tests employing modified mill than with traditional equipment, and that no distinct differences could be found in the products prepared by the vibratory and planetary mills. Active carbon powder was found to exhibit an excellent reducing capacity for metallic oxides, while graphite powder was found inappropriate in this process. Based on the experimental results, purified Cu–Cr alloy nano-scale grain can prepared by mechanical alloying in the modified mill at 325 C for 3 h with a ball-to-powder mass ratio of 15:1. A crystal agglomeration phenomenon was also found in the final alloy powder, leading to an increase in particle size.
محصولات مرتبط
اثر میکروساختار ماده بر فرسایش ابزار هنگام ماشینکاری آلیاژهای سخت تیتانیوم
ماشین کاری آلیاژ تیتانیوم Experimental investigation on the effect of the material microstructure on tool wear when machining hard titanium alloys:…
اتصال Inconel 625 به UNS 32205 به روش جوشکاری پرتو الکترونی
Investigations on the structure – Property relationships of electron beam welded Inconel 625 and UNS 32205 بررسی روابط خواص-ساختار اتصال…
انتخاب پوشش Coating Selection
Coating Selection انتخاب پوشش ABSTRACT An improved approach to coating selection should thus allow progressive elimination and lend itself to a…
اثر اندازه نمونه بر ریزساختار و انجماد جهت دار فاز بین فلزی Al2Cu
Effect of sample size on intermetallic Al2Cu microstructure and orientation evolution during directional solidification اثر اندازه نمونه بر ریزساختار فاز…
73,000 تومان قیمت اصلی 73,000 تومان بود.29,500 تومانقیمت فعلی 29,500 تومان است.
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.