مطالعه طیف امپدانس الکتروشیمیایی برای بررسی رفتار خوردگی پوشش PVD روی فولاد در محلول NaCl 5/0 مولار: قسمت ۲. تفسیر EIS رفتار خوردگی
An electrochemical impedance spectroscopy study of the corrosion behaviour of PVD coated steels in 0.5 N NaCl aqueous solution: Part II. EIS interpretation of corrosion behaviour
چکیده
در بخش اول این تحقیق، مدار معادل طیف امپدانس الکتروشیمیایی برای بررسی رفتار خوردگی پوشش PVD روی فولاد در محلول NaCl 5/0 مولار تعیین شد. در این مقاله (قسمت۲) طیف EIS چنین پوششی با استفاده از مدار معادل مربوطه مدلسازی شد. پارامترهای مدار به مشخصات دی الکتریک، میکروساختار فولادها و پوشش سخت PVD وابسته است. تغییر تخلخل پوشش و خوردگی موضعی با گذشت زمان غوطه وری از روی اختلاف پتانسیل خوردگی بین فولاد و پوشش PVD (ΔEcorr) و مقاومت پلاریزاسیون (Rp) تعیین می شود که خود این داده ها نیز از روی مدلسازی EIS با مدار معادل به دست آمده اند.
علاوه بر این، نرخ نفوذ واکنش گرها (مثل اکسیژن) از میان عیوب (مانند حفرات) با وارد کردن امپدانس نفوذی W و O به مدار معادل EIS مطالعه شد. مشخص شد که استفاده از امپدانس W و O به ویژگی های کریستالیت پوشش PVD مربوط می شود. امپدانس واربورگ W بیشتر برای کریستالیت های ستونی مناسب است؛ این درحالی است که امپدانس نفوذی کتانژانت هیپربولیک O مناسب مطالعهی ساختارهای هم محور است. در نهایت، بررسی چشمی، SEM و تکنیک الکترود مرجع روبشی برای مشاهدهی پیشرفت خوردگی پوشش PVD روی فولاد به کار گرفته شد تا نتایج EIS اثبات گردد.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
In Part I, of this work the equivalent circuits for electrochemical impedance spectroscopy (EIS) modelling of PVD coated steels in 0.5 N NaCl solution were established. In this paper, Part II, the EIS spectra of such coated systems are modelled using the equivalent circuits. The circuit parameters obtained are correlated with the dielectric characteristics, and microstructure of steels and PVD hard coatings. Coating porosity and localised corrosion with exposure time have also been determined using the corrosion potential difference (DEcorr) between mild steel and PVD coatings and polarisation resistance Rp, which was obtained through EIS modelling using equivalent circuits.
In addition, diffusion rates of the reactants (e.g. oxygen) through permeable defects (e.g. pores) are studied by introducing the diffusion impedances W and O in EIS modelling. It has been found that the usage of impedances W and O is closely related to the crystallite features of PVD coatings. Warburg impedance (W ) is most suitable for columnar crystallites, while the co-tangent-hyperbolic diffusion impedance (O) is best for the equiaxed crystallite structure. Finally, visual inspection, SEM examination, and the scanning reference electrode technique were employed to observe the corrosion progress of PVD coated steels with immersion time, in order to validate the EIS interpretation.
محصولات مرتبط
بهبود فولاد میکروآلیاژی HSLA با وانادیم و تیتانیم
Effect of vanadium and titanium modification on the microstructure and mechanical properties of a microalloyed HSLA steel بهبود فولاد میکروآلیاژی HSLA…
اثر عملیات حرارتی فولاد میکروآلیاژی بر خواص مکانیکی Mechanical Properties of a Microalloyed Steel
عملیات حرارتی فولاد میکروآلیاژی Effect of Intercritical Heat Treatment on Mechanical Properties of a Microalloyed Steel اثر عملیات حرارتی بین دماهای…
انجماد جهتدار آلیاژهای آلومینیوم – مس Directional solidification of aluminium–copper alloys
Directional solidification of aluminium–copper alloys انجماد جهتدار آلیاژهای آلومینیوم-مس ABSTRACT Directional solidification experiments have been carried out on different Al–Cu…
بیومواد آلومینای چقرمه شده با زیرکونیا برای جایگزین مفصل
Advances in zirconia toughened alumina biomaterials for total joint replacement پیشرفت ها در بیومواد آلومینای چقرمه شده با زیرکونیا برای…
98,500 تومان قیمت اصلی 98,500 تومان بود.29,500 تومانقیمت فعلی 29,500 تومان است.
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.