ساخت آلیاژ Mg-Ca به روش متالورژی پودر برای کاربرد ایمپلنت زیست تخریب پذیر
Powder metallurgy preparation of Mg-Ca alloy for biodegradable implant application
چکیده
منیزیم و آلیاژهای آن یک گزینه محتمل و نوید دهنده برای کاربرد ایمپلنت بخصوص به علت خاصیت زیست تخریب پذیری آن است. در این تحقیق، ساخت آلیاژ Mg-Ca به روش متالورژی پودر (به درصد وزنی) از پودر منیزیم خالص و گرانول کلسیم تهیه شدند. فرایند آسیاب در آسیاب لرزشی با استفاده از گلوله های فولاد زنگ نزن به مدت زمانهای مختلف (۳، ۵ و ۸ ساعت) انجام شد و سپس پودرها تحت عملیات فشرده سازی و زینتر قرار گرفتند. زینتر در دماهای مختلف (˚C 450 و ˚C 550) به منظور بررسی اثر دمای زینتر بر خواص مکانیکی و مقاومت خوردگی انجام گرفت.
ارزیابی ریزساختاری به روش های تفرق اشعه ایکس XRD، میکروسکوپ الکترونی روبشی SEM و طیف سنج تفکیک انرژی اشعه ایکس EDX انجام شد. خواص مکانیکی و رفتار خوردگی به روش سختی سنجی و تست الکتروشیمیایی در محلول هانک (سیال شبیه سازی شده بدن) بررسی شدند. در این گزارش، زمان آسیاب طولانی موجب کاهش اندازه ذرات شده و روی خواص مکانیکی آلیاژ منیزیم تاثیر گذار بوده است. آنالیز فازی نشان میدهد که فازهای α-Mg، Mg2Ca و MgO پس از زینتر تشکیل شده اند. به علاوه این تحقیق نشان داد که آلیاژ Mg-Ca تهیه شده با روشهای مختلف متالورژی پودر، علیرغم مقدار کلسیم یکسان نرخ خورگی متفاوت داشتند.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
Magnesium and its alloys is a promising candidate for implant application especially due to its biodegradability. In this study, Mg-7Ca alloys (in weight %) were processed by powder metallurgy from pure magnesium powder and calcium granule. Milling process was done in a shaker mill using stainless steel balls in various milling time (3, 5, and 8 hours) followed by compaction and sintering process. Different sintering temperatures were used (450°C and 550°C) to examine the effect of sintering temperature on mechanical properties and corrosion resistance.
Microstructure evaluation was characterized by X-ray diffraction, scanning electron microscope and energy dispersive X-ray spectroscopy. Mechanical properties and corrosion behavior were examined through hardness testing and electrochemical testing in Hank’s solution (simulation body fluid). In this report, a prolonged milling time reduced particle size and later affected mechanical properties of Mg alloy. Meanwhile, the phase analysis showed that α Mg, Mg2Ca, MgO phases were formed after the sintering process. Further, this study showed that Mg-Ca alloy with different powder metallurgy process would have different corrosion rate although there were no difference of Ca content in the alloy.
محصولات مرتبط
اتصال Inconel 625 به UNS 32205 به روش جوشکاری پرتو الکترونی
Investigations on the structure – Property relationships of electron beam welded Inconel 625 and UNS 32205 بررسی روابط خواص-ساختار اتصال…
ارزیابی عمق ترک با استفاده از تکنیک های جریان گردابی
Evaluation of crack depth using eddy current techniques with GMR-based probes ارزیابی عمق ترک با استفاده از تکنیک های جریان…
اثر عملیات حرارتی فولاد میکروآلیاژی بر خواص مکانیکی Mechanical Properties of a Microalloyed Steel
عملیات حرارتی فولاد میکروآلیاژی Effect of Intercritical Heat Treatment on Mechanical Properties of a Microalloyed Steel اثر عملیات حرارتی بین دماهای…
انتخاب پوشش Coating Selection
Coating Selection انتخاب پوشش ABSTRACT An improved approach to coating selection should thus allow progressive elimination and lend itself to a…
47,500 تومان قیمت اصلی 47,500 تومان بود.23,900 تومانقیمت فعلی 23,900 تومان است.
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.