آنالیز تخلخل و رفتار اکسیداسیون پوشش YSZ و YSZ/LaPO4
Porosity analysis and oxidation behavior of plasma sprayed YSZ and YSZ/LaPO4 abradable thermal barrier coatings
چکیده
در این تحقیق، رفتار اکسیداسیون پوشش YSZ ، YSZ ، YSZ-10%LaPO۴و YSZ-20%LaPO۴ در دمای بالا، تخلخل و ریزساختار آن که به روش اتمسفری (APS) تولید شده، مورد بررسی قرار گرفتند. نتایج نشان می دهد که درصد حجمی تخلخل در LaPO۴ بالاتر از نمونه YSZ یکپارچه بود. این احتمالا به دلیل هدایت حرارتی کمتر فازهای LaPO۴ بود. علاوه بر این، نتایج نشان داد که میزان تخلخل باقی مانده در پوشش های YSZ یکپارچه در ۱۰۰۰ درجه سانتیگراد به مدت ۱۲۰ ساعت بود. پس از ۱۲۰ ساعت اکسیداسیون همدما، ضخامت لایه اکسید رشد حرارتی کرده (TGO) در پوشش های YSZ به دلیل تخلخل و مقاومت به زینترینگ بالاتر پوشش های کامپوزیتی بود. در نهایت، مقاومت در برابر اکسیداسیون هم دمای پوشش YSZ معمولی و نانوساختار مورد بررسی قرار گرفت.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
In this research, the high temperature oxidation behavior, porosity, and microstructure of four abradable thermal barrier coatings (ATBCs) consisting of micro- and nanostructured YSZ, YSZ-10%LaPO۴, and YSZ20%LaPO۴ coatings produced by atmospheric (APS) method were evaluated. Results show that the volume percentage of porosity in the coatings containing LaPO۴ was higher than the monolithic YSZ sample. It was probably due to less thermal conductivity of LaPO۴ phases. Furthermore, the results showed that the amount of the remaining porosity in the composite coatings was higher than the monolithic YSZ at 1000 °C for 120 h. After 120 h isothermal oxidation, the thickness of thermally growth oxide (TGO) layer in composite coatings was higher than that of YSZ coating due to higher porosity and sintering resistance of composite coatings. Finally, the isothermal oxidation resistance of conventional YSZ and nanostructured YSZ coating was investigated.
محصولات مرتبط
اثرات آنتی باکتریال فلزات Antibacterial effects of metals
اثرات آنتی باکتریال فلزات Antibacterial effects of metals اثرات آنتی باکتریال فلزات ABSTRACT In this chapter, the antibacterial effects of…
اثر نیتروژن روی خواص خزشی فولاد زنگ نزن
Evaluation of the effect of nitrogen on creep properties of ۳۱۶LN stainless steel from impression creep tests ارزیابی اثر نیتروژن روی…
بیومواد آلومینای چقرمه شده با زیرکونیا برای جایگزین مفصل
Advances in zirconia toughened alumina biomaterials for total joint replacement پیشرفت ها در بیومواد آلومینای چقرمه شده با زیرکونیا برای…
اثر کار مکانیکی بر ساختار آلیاژ منگنز آلومینیوم Effect Of Prior Working On The Structure Of Mn-29.5% Al-0.5% C ALLOY
Effect Of Prior Working On The Structure and Deformation Capacity Of Mn-29.5% Al-0.5% C ALLOY اثر کار مکانیکی اولیه بر ساختار…
87,900 تومان قیمت اصلی 87,900 تومان بود.21,900 تومانقیمت فعلی 21,900 تومان است.
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.