اتصال فلز غیر همسان آلیاژ آلومینیم ۲۰۲۴ و ۷۰۷۵ به تیتانیوم با جوشکاری اصطکاکی اغتشاشی
Dissimilar Metal Joining of 2024 and 7075 Aluminium Alloys to Titanium Alloys by Friction Stir Welding
چکیده
فرآیند جوشکاری اصطکاکی اغتشاشی (FSW) یک فرآیند اتصال دهی حالت جامد است، دمای اتصال کمتر از فرآیندهای جوشکاری ذوبی است. بنابراین، برای جوشکاری فلزات غیر همسان، فرآیند FSW به دلیل نشان دادن چندین مزیت نسبت به جوشکاری ذوبی، مورد نظر قرار می گیرد. مقاله حاضر جوش پذیری آلیاژ آلومینیم ۲۰۲۴ و ۷۰۷۵ و تیتانیوم با استفاده از فرایند جوشکاری اصطکاکی اغتشاشی را مورد بررسی قرار می دهد. ورق های آلومینیومی مورد استفاده در این کار T3 و T651 ورق های تیتانیوم استفاده شده، تیتانیوم خالص Ti-6Al-4V بودند.
استحکام کششی میانگین اتصالات جوشکاری FSW Ti/2024، ۳۱۱ MPa بود، و همچنین در شرایط اتصال دهی یکسان استحکام کششی اتصال Ti/2024 بیشتر از اتصال FSW Ti/7075 می باشد. ناحیه مخلوط شده آلیاژ تیتانیوم و آلیاژ آلومینیوم در فصل مشترک اتصال مشاهده شد، و بیشتر اتصالات در این ناحیه، جایی که لایه ترکیبی بین فلزی وجود داشت، شکسته می شوند. در این ناحیه یک ترکیب بین فلزی TiAl3 با استفاده از XRD شناسایی شد. بنابراین استنباط می شود که این ترکیب بین فلزی TiAl3 بر استحکام کششی اتصالات تاثیر می گذارد.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
The friction stir welding (FSW) process is a solid-state joining process and the joining temperature is lower than that used in the fusion welding processes. Therefore, for dissimilar metal welding, FSW is considered to offer several advantages over fusion welding. The present work investigated the weldability of duralumin and titanium alloys using friction stir welding. The aluminum plates used in this work were 2024T3 and 7075-T651, and the titanium plates used were pure titanium and Ti-6Al-4V.
The average tensile strength of the Ti/2024 FSW joints was 311MPa, and the tensile strength of the Ti/2024 joint was higher than that of the Ti/7075 FSW joint when the joining conditions were the same. A mixed region of Ti alloy and Al alloy was observed at the joint interface, and the joints mainly fractured at this region, where there was an intermetallic compound layer. In this region, a TiAl۳ intermetallic compound was detected by XRD. Therefore, it can be understood that this TiAl۳ intermetallic compound affects the tensile strength of butt joints.
محصولات مرتبط
اثرات آنتی باکتریال فلزات Antibacterial effects of metals
اثرات آنتی باکتریال فلزات Antibacterial effects of metals اثرات آنتی باکتریال فلزات ABSTRACT In this chapter, the antibacterial effects of…
اثر ترکیب روی بافت کریستالوگرافی آلیاژهای آلومینیوم
بافت کریستالوگرافی آلیاژهای آلومینیوم Effect of composition on crystallographic texture in hot-rolled Al-Li-Cu alloys اثر ترکیب روی بافت کریستالوگرافی در…
استفاده از فولاد زنگ نزن آستنیتی AISI 316 به عنوان تقویتکننده در بتن
Practical and Economic Aspects of Application of Austenitic Stainless Steel, AISI 316, as Reinforcement in Concrete جنبههای عملی و اقتصادی…
بیومواد آلومینای چقرمه شده با زیرکونیا برای جایگزین مفصل
Advances in zirconia toughened alumina biomaterials for total joint replacement پیشرفت ها در بیومواد آلومینای چقرمه شده با زیرکونیا برای…
54,500 تومان قیمت اصلی 54,500 تومان بود.13,900 تومانقیمت فعلی 13,900 تومان است.
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.