ساخت نانوکامپوزیت آلومینیوم گرافیت آلومینا هیبریدی سطحی به وسیلهی روش اصطکاکی اغتشاشی و بررسی خواص ریزساختاری و سایشی کامپوزیت
Fabrication of Al/Graphite/Al2O3 Surface Hybrid Nano Composite by Friction Stir Processing and Investigating The Wear and Microstructural Properties of The Composite
چکیده
فرآیند اصطکاکی اغتشاشی برای ساخت نانوکامپوزیت هیبریدی پایه آلیاژ آلومینیوم تقویت شده با Al۲O۳ در اندازهی نانو و میکرو ذرات گرافیت به کار برده شد. مخلوطی از ذرات Al۲O۳ و گرافیت درون شایری به پهنای mm 1 و عمق mm 5/4 بسته بندی شد که این شیار در ورق آلومینیوم ۵۰۸۳ به ضخامت mm 10 بریده شده است. بستهی درون شیار تحت فرآیند اصطکاکی اغتشاشی قرار داده شد تا ترکیب پودر درون زمینهی آلیاژ آلومینیوم انجام شود. خواص ریزساختار به وسیلهی میکروسکوپ نوری و میکروسکوپ الکترونی روبشی (SEM) بررس شدند. یافته شد که مخلوط ذره مقاومساز در منطقهی دکمه به طور یکنواخت توزیع شد. مقاومت سایشی کامپوزیت به وسیلهی آزمون خزش لغزش خشک اندازهگیری شد. در نتیجه، کامپوزیت هیبریدی در مقایسه با کامپوزیت Al/Al۲O۳ تولید شده به وسیلهی فرآیند اصطکاکی اغتشاشی، کاهش چشمگیری در نرخ سایش نشان داد. سطح ساییده شدهی نمونههای آزمون سایش به وسیلهی SEM برای تعیین ساز و کار سایش بررسی شدند.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
Abstract Friction stir processing was applied for fabricating an aluminum alloy based hybrid nano composite reinforced with nano sized Al,0, and micro sized graphite particles. A mixture of Alo, and graphite particles was packed into a groove with 1 mm width and 4.5 mm depth, which had been cut in 5083 aluminum plate of 10 mm thick. Packed groove was subjected to friction stir processing in order to implement powder mixture into the aluminum alloy matrix. Microstructural properties were investigated by means of optical microscopy and scanning electron microscopy (SEM). It was found that reinforcement particle mixture was distributed uniformly in nugget zone. Wear resistance of composite was measured by dry sliding wear test. As a result, hybrid composite revealed significant reduction in wear rate in comparison with AI/AL O, composite produced by friction stir processing. Wom surface of the wear test samples were examined by SEM in order to determine wear mechanism.
محصولات مرتبط
اثر گرافیت بر اکسیداسیون ZrB2-SiC در هوا
The effect of a graphite addition on oxidation of ZrB2–SiC in air at 1500 ◦C اثر گرافیت بر اکسیداسیون ZrB2-SiC…
انتخاب پوشش Coating Selection
Coating Selection انتخاب پوشش ABSTRACT An improved approach to coating selection should thus allow progressive elimination and lend itself to a…
اثر کار مکانیکی بر ساختار آلیاژ منگنز آلومینیوم Effect Of Prior Working On The Structure Of Mn-29.5% Al-0.5% C ALLOY
Effect Of Prior Working On The Structure and Deformation Capacity Of Mn-29.5% Al-0.5% C ALLOY اثر کار مکانیکی اولیه بر ساختار…
اطلس عیوب ریخته گری
اطلس عیوب ریخته گری عیوب ریخته گری از گذشته در قطعات باعث بحران بوده اند و مهم ترین وظیفه ریخته گران…
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.