تولید کامپوزیت هیبریدی سطحی از طریق فرآیند اصطکاکی اغتشاشی و اثر آن بر روی رفتار خزش موثر
Fabrication of Hybrid Surface Composite through Friction Stir Processing and Its Impression Creep Behaviour
چکیده
با نیکل و NiAl۳ به عنوان ذرات مقاومساز و در زمینهی آلومینیومی تولید کرد. ذرات ریز بودند و در گسترهی اندازهی کمتر از میکرومتر قرار داشتند. فاصلهی جدایی بین ذرات خیلی کوچک بود. آزمایشهای اثر خزش بر روی نمونهها هم در منطقهی اصطکاکی اغتشاشی و هم در منطقهی مادهی پایه در دماهای مختلف انجام شدند. نرخهای خزش حالت پایا تخمین زده شدند و انرژی فعالسازی برای خزش محاسبه شد. مشاهده شد که منطقهی اصطکاکی اغتشاشی مقاومت خزشی بیشتری نسبت به منطقهی فلز پایه ارائه داد.
مقاومت خزش در تولید کامپوزیت هیبریدی سطحی بالاتر به حل شدن اتمهای نیکل در زمینهی آلومینیومی و حضور ذرات ریز نیکل و روسوبات NiAl۳ نسبت داده میشود. انرژی فعالسازی اندازهگیری شده نشان میدهد که ساز و کار خزش همراه در هر دو منطقهی همزدن مکانیکی و منطقهی فلز پایه، خزش نابجایی در گسترهی دمایی ºC 30-150 است. در دماهای بالاتر (ºC 150-180) ساز و کار خزش پخشی پیشنهاد میشود.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
Al-Ni in situ surface composites were fabricated by friction stir processing method. Friction stir processing produced a composite with nickel and NiAl۳ as reinforcement particles in aluminium matrix. The particles were fine and were in the submicrometer size range. The separation distance between the particles was very small. Impression creep experiments were conducted on the samples both at friction stir zone and base material zone at various temperatures. Steady state creep rates were estimated, and activation energy for creep was calculated. It is observed that the friction stir zone offered a higher creep resistance compared to the base metal zone.
Higher creep resistance is attributed to the dissolution of nickel atoms into aluminium matrix and the presence of fine nickel particles and NiAl۳ precipitates. The measured activation energy indicated that the associated creep mechanism is the dislocation creep in the temperature range of 30–۱۵۰∘C, both in friction stir zone and base metal zone. At higher temperatures (150–۱۸۰∘C) the diffusion creep mechanism is suggested.
محصولات مرتبط
اتصال Inconel 625 به UNS 32205 به روش جوشکاری پرتو الکترونی
Investigations on the structure – Property relationships of electron beam welded Inconel 625 and UNS 32205 بررسی روابط خواص-ساختار اتصال…
بهبود فولاد میکروآلیاژی HSLA با وانادیم و تیتانیم
Effect of vanadium and titanium modification on the microstructure and mechanical properties of a microalloyed HSLA steel بهبود فولاد میکروآلیاژی HSLA…
انجماد جهتدار آلیاژهای آلومینیوم – مس Directional solidification of aluminium–copper alloys
Directional solidification of aluminium–copper alloys انجماد جهتدار آلیاژهای آلومینیوم-مس ABSTRACT Directional solidification experiments have been carried out on different Al–Cu…
اطلس عیوب ریخته گری
اطلس عیوب ریخته گری عیوب ریخته گری از گذشته در قطعات باعث بحران بوده اند و مهم ترین وظیفه ریخته گران…
62,000 تومان قیمت اصلی 62,000 تومان بود.15,500 تومانقیمت فعلی 15,500 تومان است.
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.