لایه نشانی پوشش سد حرارتی YSZ بر روی آلیاژ اینکونل ۷۳۸ به روش تف جوشی پلاسمای جرقه ای (SPS): توسعه ریزساختار و رفتار خوردگی داغ
Spark plasma sintering of a multilayer thermal barrier coating on Inconel 738 superalloy: Microstructural development and hot corrosion behavior
چکیده
در مقاله حاضر فرآیند تف جوشی پلاسمای جرقه ای (SPS) برای لایه نشانی پوشش نانوساختار زیرکونیای پایدار شده با ایتریا YSZ بر سوپرآلیاژ پایه نیکل (اینکونل ۷۳۸) با ساختار گرید کاربردی استفاده شد. یک لایه ضخیم از اینکونل ۷۳۸ / پودر NiCrAlY/ فویل آلومینیوم / پودر NiCrAlY و پودر YSZ / پودر YSZ در یک قالب گرافیتی در فشار اعمالی ۴۰ مگاپاسکال تحت اتمسفر خلاء ۸ پاسکال SPS شد. دمای تف جوشی (زینتر) ۱۰۴۰ درجه سانتیگراد بود. برای مقایسه تکنیک اسپری پلاسمای هوا (APS) برای آماده سازی پوشش سد حرارتی (TBC) به کار گرفته شد. مطالعات ریزساختاری توسط میکروسکوپ SEM انجام شد و نشان داده شد که پوشش SPS شده بدون نقص و خالی از ترک های فصل مشترکی و حفرات بزرگ بود. طیف سنجی اشعه ایکس توزیع کننده انرژی یک نفوذ بینی محدود را بین لایه ها نشان داد. بهبود چشمگیری (حدود ۲۶%) در ریزسختی سنجی ویکرز نیز نشان داده شد. به منظور ارزیابی عاملیت پوشش ها، آزمون خوردگی داغ در دمای ۱۰۵۰ درجه سانتیگراد در حمام مذاب و (با نسبت وزنی ۴۵ به ۵۵) انجام شد. نتایج نشان داد که به ترتیب پس از ۱۲ ساعت و ۲۰ ساعت در لایه نشانی پوشش های YSZ و APS ورقه ورقه شدن رخ داده است.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
In the present work, spark plasma sintering (SPS) process was employed to prepare a nanostructured yttria-stabilized zirconia (8YSZ) coating on a nickel-based superalloy (INCONEL 738) with functionally graded structure. A stack layer of INCONEL 738/NiCrAlY powder/Al foil/ NiCrAlYþYSZ powder/YSZ powder was SPSed in a graphite die at an applied pressure of 40 MPa under an vacuum atmosphere (8 Pa). The sintering temperature was 1040 1C. For comparison purpose, the air plasma spray (APS) technique was employed to prepare the thermal barrier coating (TBC). Microstructural studies by scanning electron microscopy showed that the SPSed coating was sound and free of interfacial cracks and large pores. Energy dispersive X-ray spectroscopy determined a limited inter-diffusion between the layers. A significant improvement (26%) in the Vickers micro-hardness was also measured. In order to examine the functionality of the coatings, hot corrosion test was performed at 1050 1C in a molten bath of Na۲SO۴ and V۲O۵ (۴۵ to 55 weight ratio). The results showed that spallation occurred after 12 and 20 h for the SPSed and APS coatings, respectively.
محصولات مرتبط
اثر نیتروژن روی خواص خزشی فولاد زنگ نزن
Evaluation of the effect of nitrogen on creep properties of ۳۱۶LN stainless steel from impression creep tests ارزیابی اثر نیتروژن روی…
استفاده از فولاد زنگ نزن آستنیتی AISI 316 به عنوان تقویتکننده در بتن
Practical and Economic Aspects of Application of Austenitic Stainless Steel, AISI 316, as Reinforcement in Concrete جنبههای عملی و اقتصادی…
آلومینات ها Aluminates
Aluminates آلومینات ها ABSTRACT Aluminates form in binary systems with alkali, alkaline earth or rare-earth oxides and share the high…
اثر اندازه نمونه بر ریزساختار و انجماد جهت دار فاز بین فلزی Al2Cu
Effect of sample size on intermetallic Al2Cu microstructure and orientation evolution during directional solidification اثر اندازه نمونه بر ریزساختار فاز…
76,000 تومان قیمت اصلی 76,000 تومان بود.19,000 تومانقیمت فعلی 19,000 تومان است.
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.