Effects of anodizing parameters and heat treatment on
nanotopographical features, bioactivity, and cell culture
response of additively manufactured porous titanium
اثر پارامترهای آندایزینگ و عملیات حرارتی بر نانو عوارض سطحی، زیستفعالی
و پاسخ کشت سلول در تیتانیوم متخلخل ساختهشده به روش افزایشی
ABSTRACT
Anodizing could be used for bio-functionalization of the surfaces of titanium alloys. In this study, we use anodizing for creating nanotubes on the surface of porous titanium alloy bone substitutes manufactured using selective laser melting. Different sets of anodizing parameters (voltage: 10 or 20 V anodizing time: 30 min to 3 h) are used for anodizing porous titanium structures that were later heat treated at 500o C. The nanotopographical features are examined using electron microscopy while the bioactivity of anodized surfaces is measured using immersion tests in the simulated body fluid (SBF).
جهت دانلود رایگان نسخه لاتین این مقاله اینجا کلیک کنید .
چکیده
از آندایزینگ میتوان برای زیست-فعالسازی سطوح آلیاژهای تیتانیوم استفاده کرد. در این تحقیق، ما از آندایزینگ برای ساخت نانولولهها روی سطح استخوانهای جایگزین از جنس تیتانیوم متخلخل، که به روش ذوب انتخابی با لیزر ساخته شدهاند، استفاده میکنیم. دستههای مختلفی از پارامترهای آندایزینگ (ولتاژ: ۱۰ یا ۲۰ V زمان آندایزینگ: ۳۰ min تا ۳ h) برای آندایز کردن ساختارهای تیتانیوم متخلخل مورد استفاده قرار گرفتند. این ساختارها متعاقبا در دمای ۵۰۰°C عملیات حرارتی شدند. عوارض سطحی نانومتری با استفاده از میکروسکوپ الکترونی بررسی شدند درحالی که زیستفعالی سطوح آندایزشده با استفاده از آزمونهای غوطهوری در مایع بدن شبیهسازیشده (SBF) اندازهگیری شد.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
محصولات مرتبط
عملیات حرارتی فولاد دوپلکس
عملیات حرارتی فولاد دوپلکس Effect of heat treatment on microstructure and mechanical properties of duplex stainless steel اثر عملیات حرارتی بر…
انجماد جهتدار آلیاژهای آلومینیوم – مس Directional solidification of aluminium–copper alloys
Directional solidification of aluminium–copper alloys انجماد جهتدار آلیاژهای آلومینیوم-مس ABSTRACT Directional solidification experiments have been carried out on different Al–Cu…
انتخاب پوشش Coating Selection
Coating Selection انتخاب پوشش ABSTRACT An improved approach to coating selection should thus allow progressive elimination and lend itself to a…
تولید ذرات ریز τ-MnAl با روش های مختلف A comparison of τ-MnAl particulates produced via different routes
A comparison of τ-MnAl particulates produced via different routes مقایسه ذرات ریز τ-MnAl تولید شده از طریق راه های مختلف…
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.