Fracture Toughness of a Hybrid-Rubber-Modified
Epoxy. I. Synergistic Toughening
چقرمگی شکست اپوکسی اصلاح شده با لاستیک هیبریدی
I . اثر تشدید کننده چقرمه شدن
ABSTRACT
The fracture behavior of a hybrid-rubber-modified epoxy system was investigated. The modified epoxy included amine-terminated butadiene acrylonitrile (ATBN) rubber and recycled tire particles as fine and coarse modifiers, respectively. The results of the fracture toughness (KIC) measurement of the blends revealed synergistic toughening in the hybrid system when 7.5-phr small particles (ATBN) and 2.5-phr large particles (recycled tire) were incorporated. Transmission optical micrographs showed different toughening mechanisms for the blends; fine ATBN particles increased the toughness by increasing the size of the damage zone and respective plastic deformation in the vicinity of the crack tip. However, in the case of hybrid resin, coarse recycled rubber particles acted as large stress concentrators and resulted in the branching of the original crack tip. Mode mixity at the branch tips led to synergistic KIC in the hybrid system. It seemed that the ductility of the matrix played an effective role in the nature of the crack-tip damage zone in the hybrid epoxies
جهت دانلود رایگان نسخه لاتین این مقاله اینجا کلیک کنید .
چکیده
رفتار شکست سیستم اپوکسی اصلاح شده با لاستیک هیبریدی بررسی شد. اپوکسی اصلاح شده، محتوی رزین آکریلونیتریل بوتادین دارای گروه انتهایی آمینی (ATBN) و ذرات لاستیکی بازیافت شده به ترتیب به عنوان تعدیل کننده های ریز و درشت است. نتایج اندازه گیری چقرمگی شکست (KIC) این ترکیب ها، وقتی که ذرات کوچک ۷.۵phr (ATBN) و ذرات بزرگ ۲.۵phr ( لاستیک بازیافت شده ) ثبت می شود، اثر تشدیدکننده چقرمه شدن را در سیستم هیبریدی بیان می کند. ریزنگارهای نوری عبوری، مکانیزم های چقرمگی متفاوتی را برای ترکیب ها نشان می دهد؛ ذرات ریز ATBN چقرمگی را به وسیله ی افزایش اندازه ی منطقه آسیب دیده و تغییرشکل پلاستیک نسبی در مجاورت نوک ترک افزایش می دهد. اگر چه، در مورد رزین هیبریدی، ذرات ساینده بازیافت شده درشت به عنوان متمرکز کننده تنش بالا عمل کرد و در شاخه ای از نوک ترک اصلی نتیجه شد. حالت اختلاط در صفحات کوچک انشعابی منجر به اثر تشدیدکننده KIC در سیستم هیبریدی شد. به نظر می رسد که انعطاف پذیری زمینه، نقش موثری را در ماهیت منطقه معیوب صفحه ترک در اپوکسی های هیبریدی ایفا می کند.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
محصولات مرتبط
اثر میکروساختار ماده بر فرسایش ابزار هنگام ماشینکاری آلیاژهای سخت تیتانیوم
ماشین کاری آلیاژ تیتانیوم Experimental investigation on the effect of the material microstructure on tool wear when machining hard titanium alloys:…
استفاده از فولاد زنگ نزن آستنیتی AISI 316 به عنوان تقویتکننده در بتن
Practical and Economic Aspects of Application of Austenitic Stainless Steel, AISI 316, as Reinforcement in Concrete جنبههای عملی و اقتصادی…
انتخاب پوشش Coating Selection
Coating Selection انتخاب پوشش ABSTRACT An improved approach to coating selection should thus allow progressive elimination and lend itself to a…
بیومواد آلومینای چقرمه شده با زیرکونیا برای جایگزین مفصل
Advances in zirconia toughened alumina biomaterials for total joint replacement پیشرفت ها در بیومواد آلومینای چقرمه شده با زیرکونیا برای…
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.