رفتار تغییر شکل خمیری فولاد
Deformation behavior of steels in mushy state
چکیده
فرآوری فلزات در منطقه خمیری یا نیمه جامد به عنوان یکی از فرآیندهای تجاری اساسی برای تولید فلز و کامپوزیت های پایه فلز می باشد. برای فهم و درک رفتار تغییر شکل خمیری فولاد و سایر مواد، کنترل بهتر فرآیندهای گوناگون نیمه جامد دارای اهمیت می باشد.
هدف از انجام این پژوهش تعیین نمودن کمیت سیلان تنش در منطقه خمیری فولادها در شرایط تغییر شکل تک محوری می باشد. یک دستگاه فشرده کننده (پرس) که با ایجاد دماهای بالا بتواند منطقه خمیری مورد نیاز را تامین نماید، برای این آزمایش به کار گرفته شده است. یک برنامه تحلیلی که تنها بتواند ابعاد نهایی نمونه های منجمد یافته را اندازه گیری نماید نیز مورد نیاز می باشد تا بتواند تاثیر بشکه ای شدن را در حین تست فشار حذف نماید. دمای نمونه ها با دقت کنترل گردیده اند تا حجم فاز جامد پیوسته باقی بماند. دریافتیم که سیلان تنش در مناطق خمیری در فولادها به طور بسیار زیادی بستگی به درصد فاز جامد دارد. همچنین در این بخش به آرام بودن فولاد و کاهش تنش پرداخته ایم.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
Processing metals in a semisolid or mushy state has emerged as a vital commercial process to produce metal and metal-matrix composite components. The understanding of the basic deformation behavior of materials in the mushy state is critical for better control of various semisolid processes.
The aim of the present study is to quantify the flow stress of mushy-state steels under uniaxial deformation conditions. A hot compression tester has been developed to provide the high temperature setting required for testing mushy-state steels. An analytical scheme, which only requires measuring the dimensions of the final solidified specimen, has been developed to eliminate the barreling effects occurring in compression tests. The temperature of specimens has been carefully controlled to correlate the solid phase content. It has been found that the flow stress of steels in mushy states was highly dependent on the solid phase percentage. The relaxation of steel and stress reduction at mushy states is also discussed. Q 2000 Elsevier Science Ltd. All rights reserved.
محصولات مرتبط
اثر میکروساختار ماده بر فرسایش ابزار هنگام ماشینکاری آلیاژهای سخت تیتانیوم
ماشین کاری آلیاژ تیتانیوم Experimental investigation on the effect of the material microstructure on tool wear when machining hard titanium alloys:…
اثر ترکیب روی بافت کریستالوگرافی آلیاژهای آلومینیوم
بافت کریستالوگرافی آلیاژهای آلومینیوم Effect of composition on crystallographic texture in hot-rolled Al-Li-Cu alloys اثر ترکیب روی بافت کریستالوگرافی در…
آلومینات ها Aluminates
Aluminates آلومینات ها ABSTRACT Aluminates form in binary systems with alkali, alkaline earth or rare-earth oxides and share the high…
آماده سازی ذرات آلومینای ریزدانه مشتق شده از ژیپسیت بایر Preparation of Fine Alumina Powder
Preparation of Fine Alumina Powder آماده سازی ذرات آلومینای ریزدانه مشتق شده از ژیپسیت بایر ABSTRACT This study involves the…
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.