مطلبی درباره جدایش روی در برنج و اثر ممانعت کنندگی افزودنی های عنصری
A note on the dezincification of brass and the inhibiting effect of elemental additions
چکیده
جدایش روی در برنج ها موضوع بررسی ها و تحقیقات زیادی در قرن اخیر بوده و مقالات زیادی درباره این مسئله منتشر شده است. مقالات فنی در این موضوع را می توان به ۵ زیرگروه اصلی تقسیم کرد:
الف- مشاهداتی از پدیده های جدایش روی و تجربیات مربوط به رخداد آن در کار در محلول های مختلف.
ب- توسعه تست هایی برای ارزیابی تمایل برنج های به جدایش روی.
ج- نظریه های مربوط به مکانیسم و سینتیک جدایش روی.
د- جلوگیری از جدایش روی در برنج بوسیله افزودنی های آلیاژی افزوده شده
ه- ممانعت از جدایش روی بوسیله عملیات شیمیایی روی برنج
این مطلب مربوط به فقط جلوگیری از جدایش روی در برنج بوسیله افزودنی های آلیاژی است. اگر چه به شرایط کاری نظیر دمای آب و ترکیب و اثر احتمالی افزودنی های آلیاژی بر دیگر خواص مهم این آلیاژ مانند قرار گرفتن در معرض ترک خوردگی تنشی باید توجه معطوف داشت.
چند مطلب درباره تاثیر کار سرد روی جدایش روی همراه با تاریخچه ای کوتاه درباره تست های جدایش روی در ضمیمه ارائه شده اند.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
The dezincification of brasses has been the subject of substantial conjecture and investigation over the past century and the technical press is littered with papers on the problem. Very broadly the technical literature can be subdivided into five main groups as follows:
(a) Observations of dezincification phenomena including mechanically induced dezincification and in-service experience in various solutions;
(b) Development of tests to assess the propensity of particular brasses to dezincify;
(c) Mechanistic theories and kinetics of dezincification;
(d) Inhibition of dezincification by alloying additions to the brass;
and (e) Inhibition of dezincification by chemical treatment of the brass. This note is concerned only with the inhibition of dezincification by alloying additions, although some notice is taken of operating conditions such as water temperature and composition and the effect that alloying additions may have on other important properties of the brass, e.g., susceptibility to stress corrosion cracking. A few notes on the effect of cold work on dezincification together with a short bibliography on
dezincification tests are presented in the Appendix.
محصولات مرتبط
اثر گرافیت بر اکسیداسیون ZrB2-SiC در هوا
The effect of a graphite addition on oxidation of ZrB2–SiC in air at 1500 ◦C اثر گرافیت بر اکسیداسیون ZrB2-SiC…
استفاده از فولاد زنگ نزن آستنیتی AISI 316 به عنوان تقویتکننده در بتن
Practical and Economic Aspects of Application of Austenitic Stainless Steel, AISI 316, as Reinforcement in Concrete جنبههای عملی و اقتصادی…
اطلس عیوب ریخته گری
اطلس عیوب ریخته گری عیوب ریخته گری از گذشته در قطعات باعث بحران بوده اند و مهم ترین وظیفه ریخته گران…
اتصال نفوذی مس به فولاد زنگ نزن تحت فشار ناگهانی
Impulse pressuring diffusion bonding of a copper alloy to a stainless steel with/without a pure nickel interlayer اتصال نفوذی مس به فولاد…
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.