روش های بهبود عمق نفوذ جوش در جوشکاری قوسی تنگستن با گاز محافظ (TIG)
(Techniques to improve weld penetration in TIG welding (A review
چکیده
اساس فرایند جوشکاری تنگستن با گاز محافظ (TIG) که مرسوم به فرایند جوشکاری قوسی تنگستن گاز (GTAW) نیز میباشد، استفاده از تشکیل قوس بین الکترود غیر مصرفی تنگستن و قطعه کار به کمک گاز محافظ است [۶-۱]. فرایند جوشکاری TIG در زمینه تولید اتصالات جوشکاری با کیفیت بالا، روشی محبوب در صنایع تولیدی محسوب میگردد [۱۲-۷]. مشکل عمده فرایند جوشکاری TIG عمق نفوذ جوش کم حاصل از آن به شمار میرود.
هدف از تدوین این مقاله مروری، بررسی روش های موجود جهت بهبود عمق نفوذ جوش و کیفیت جوش در فرایند TIG است. روش های مختلف بررسی شده شامل فرایندهای جوشکاری TIG فعال شده با فلاکس ATIG) ،TIG) با فلاکس مرزی (FBTIG) و TIG با جریان پالسی (PCTIG) هستند. نتایج حاصل از مطالعات مروری حاکی از این است که استفاده از فلاکس (ها) و روش جریان پالسی عمق نفوذ جوش حاصل از روش جوشکاری TIG را بهبود میدهد.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
Tungsten Inert Gas (TIG) welding is also known as Gas Tungsten Arc Welding (GTAW) process which is an arc based welding process that uses the arc between a non-consumable tungsten electrode and a work piece with the help of a shielding gas [1-6]. The TIG welding is used to produce high quality welds and isone of the most popular technologies for welding in manufacturing industries [7-12]. The main disadvantage of TIG welding process is low weld penetration.
The purpose of this review was to look into various techniques that may improve the weld penetration and weld quality in a TIG welding. In this review we discuss the influence of various types methods such as ATIG (Activated Flux TIG), FBTIG (Flux Bounded TIG), PCTIG (Pulsed Current Tungsten Inert Gas) Welding.It was observed during the review that use of flux or fluxes and pulsed current method improve the weld penetration with weld quality.
محصولات مرتبط
اثر میکروساختار ماده بر فرسایش ابزار هنگام ماشینکاری آلیاژهای سخت تیتانیوم
ماشین کاری آلیاژ تیتانیوم Experimental investigation on the effect of the material microstructure on tool wear when machining hard titanium alloys:…
اثر ترکیب روی بافت کریستالوگرافی آلیاژهای آلومینیوم
بافت کریستالوگرافی آلیاژهای آلومینیوم Effect of composition on crystallographic texture in hot-rolled Al-Li-Cu alloys اثر ترکیب روی بافت کریستالوگرافی در…
انتخاب پوشش Coating Selection
Coating Selection انتخاب پوشش ABSTRACT An improved approach to coating selection should thus allow progressive elimination and lend itself to a…
اطلس عیوب ریخته گری
اطلس عیوب ریخته گری عیوب ریخته گری از گذشته در قطعات باعث بحران بوده اند و مهم ترین وظیفه ریخته گران…
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.