خوردگی آلیاژ نیکل به هم جوش خورده
Stress corrosion cracking of nickel base alloy weldments
چکیده
در گستره فولادهای ضد زنگ و آلیاژها که در آنها نیکل جز اصلی است در فولادهای ضد زنگ معمول برای خوردگی از فولادهای ضد زنگ آلیاژ سخت تا آلیاژهای بر پایه نیکل، خوردگی آلیاژ پایه نیکل به علت مقاومت شان اغلب ترجیح داده می شوند. جای تعجب نیست که یک مطالعه کلی (که به عنوان بخشی از زیرمجموعه IXH (موسسه بین المللی جوش کاری) انجام گرفته شده باشد) که بیانگر ارزش این پدیده خوردگی برای فولادهای آستنیتی ضد زنگ و فولادهای فریتی/آستنیتی باشد، وجود ندارد.
در حالی که نویسندگان زیادی (به عنوان مثال مرجع ۳) و برخی استاندارد های ملی (به عنوان مثال مرجع ۴) آلیاژهای بر پایه نیکل را به این صورت تعریف می کنند که در آنها نیکل نسبت بیشتری نسبت به عناصر دیگر دارد، تعریف های دیگر برای آلیاژها از سوی سیستم شماره گذاری واحد، UNS، طبقه بندی گسترده تر است و شامل آلیاژهای با نیکل کمتر که ممکن است به عنوان فولادهای آستنیت آلیاژ سخت در نظر گرفته شوند را نیز شامل می شود. در این مقاله، تعریف اولی به همراه تعریف [Friend [5 که شامل آلیاژهای بر پایه آهن حاوی ۳۰ در صد نیکل می باشد، در نظر گرفته می شود (جدول ۱ را نظر بگیرید).
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
In the spectrum of corrosion-resisting steels and alloys in which nickel is a significant constituent, from the conventional stainless steels through the high-alloy stainless steels to the nickel-base alloys, the nickel-base alloys are often preferred precisely because of their resistance to stress-corrosion cracking, SCC. Therefore it is not surprising that a review of the literature, carried out as part of a series۱۲ compiled on behalf of Sub-Commission IXH of the International Institute of Welding, does not reveal such a wealth of work on this corrosion phenomenon as for the austenitic stainless steels and duplex ferritic/austenitic steels.
While several authors (for example, reference 3) and some national standards (for example, reference 4) have defined nickel-base alloys as those in which nickel is present in greater proportion than any other element, other definitions, such as the Unified Numbering System, UNS, classification, have been wider and included lowernickel alloys which might otherwise be regarded as high alloy austenitic steels. For the purpose of this paper, the former definition has been followed, with the extension of Friend۵ to include iron-base alloys containing 30% nickel or more (see Table I).
محصولات مرتبط
ارزیابی عمق ترک با استفاده از تکنیک های جریان گردابی
Evaluation of crack depth using eddy current techniques with GMR-based probes ارزیابی عمق ترک با استفاده از تکنیک های جریان…
انجماد جهتدار آلیاژهای آلومینیوم – مس Directional solidification of aluminium–copper alloys
Directional solidification of aluminium–copper alloys انجماد جهتدار آلیاژهای آلومینیوم-مس ABSTRACT Directional solidification experiments have been carried out on different Al–Cu…
تولید ذرات ریز τ-MnAl با روش های مختلف A comparison of τ-MnAl particulates produced via different routes
A comparison of τ-MnAl particulates produced via different routes مقایسه ذرات ریز τ-MnAl تولید شده از طریق راه های مختلف…
اثر پارامترهای جوشکاری ترمیمی بر عمر قالب های دایکست Die casting moulds
Effect of repair-welding parameters on life time of die casting moulds اثر پارامترهای جوشکاری ترمیمی بر عمر مفید قالب های…
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.