دستگاه خارج کننده لحیم و گرمکننده ردیفی برای استفاده با هم
In-line solder extractor and heater assembly for use therewith
چکیده
یک دستگاه خارج کننده لحیم و گرمکننده لوله ای ردیفی برای استفاده با هم ساخته شده است که شامل نوک لولهای قرار گرفته در سیستم گرمایش لولهای و وسیله توخالی است. ساختار گرمکن نسبت به بخش جلویی وسیله قرار میگیرد و یک محفظه مجموعه لحیم در میان وسیله قرار دارد. همچنین یک سیستم آببند کننده جلو رونده و به عقب رونده برای آببند کردن دو بخش انتهایی جلویی و عقبی در نظر گرفته شده است.
سیستم گرمکن شامل یک روکش (پوسته) لولهای و یک المنت گرمکننده لولهای که در روکش لولهای قرار گرفته است میباشد و در جهت به سمت عقب روکش گسترش مییابد. یک المنت گرمکن به همراه یک عضو پشتیبان المنت گرمکن و یک عضو آببند استوانهای و توخالی قرار دارند که به طور هم محور روی عضو پشتیبان المنت گرمکن قرار گرفتهاند تا آببندی سمت جلوی محفظه مجموعه لحیم و همچنین ایجاد فضا در آببند را از روکش لولهای و عضو پشتیبان گرمکن لولهای انجام دهند تا بخش سمت عقب عضو پشتیبان گرمکن لولهای را بتوان حداقل تا دمای ذوب لحیم گرم کرد تا احتمال گرفتگی و گیر افتادن لحیم را در عضو پشتیبان کم کند و در عین حال، در همان زمان، آببند در معرض دمایی پایین تر دمایی که پیشتر ذکر شد قرار گیرد تا طول عمر آن بیشتر شود.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
An in-line solder extractor and a tubular heating assembly for use therewith having a tubular tip disposed within the tubular heating assembly a hollow handle ,the heater assembly being mounted with respect to the forward portion of the handle a solder collection chamber disposed within the handle, and forward and rear ward seals for sealing the forward and rearward ends.
The heater assembly includes a tubular sleeve; a tubular heating element support member mounted within the tubular sleeve and extending rear wardly of the tubular sleeve, a heating element disposed along heating element support member; and a hollow, cylindrical, seal mounting member coaxially mounted on the tubular heating element support member for mounting the for ward seal of the solder collection chamber and for spacing the seal from the tubular sleeve and the tubular heating support member so that the rearward portion tubular heating support member may be raised to at least solder melting temperature to lessen the possibility of the solder clogging the support member while, at the same time, the seal is exposed to a temperature less than the last-mentioned temperature to thus promote the longevity there of.
محصولات مرتبط
بهبود فولاد میکروآلیاژی HSLA با وانادیم و تیتانیم
Effect of vanadium and titanium modification on the microstructure and mechanical properties of a microalloyed HSLA steel بهبود فولاد میکروآلیاژی HSLA…
اثر گرافیت بر اکسیداسیون ZrB2-SiC در هوا
The effect of a graphite addition on oxidation of ZrB2–SiC in air at 1500 ◦C اثر گرافیت بر اکسیداسیون ZrB2-SiC…
استفاده از فولاد زنگ نزن آستنیتی AISI 316 به عنوان تقویتکننده در بتن
Practical and Economic Aspects of Application of Austenitic Stainless Steel, AISI 316, as Reinforcement in Concrete جنبههای عملی و اقتصادی…
آماده سازی ذرات آلومینای ریزدانه مشتق شده از ژیپسیت بایر Preparation of Fine Alumina Powder
Preparation of Fine Alumina Powder آماده سازی ذرات آلومینای ریزدانه مشتق شده از ژیپسیت بایر ABSTRACT This study involves the…
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.