ریخته گری رول دوقلوی نوارهای آلیاژ آلومینیوم ۸۰۱۱ زیر اثر میدان انرژی التراسونیک
Twin-roll casting 8011 aluminium alloy strips under ultrasonic energy field
چکیده
میدان انرژی التراسونیک در طول ریخته گری رول دوقلوی آلیاژ آلومینیوم ۸۰۱۱ اعمال گردید. اثرات عملیات لرزش التراسونیک بر میکروساختار و خواص مکانیکی نوارهای ۸۰۱۱ بوسیله مشاهده با میکروسکوپ الکترونی روبشی، پراش برکشتی تفرقی الکترون و تست خواص مکانیکی بررسی شد. متوسط اندازه دانه نوارها از ۹۰um به ۷۰um و چگالی بیشینه بافت از ۴/۱۹ به ۱۵ کاهش یافت. مقدار Fe و Si در فازهای رسوب یافته از ۱۲/۱ درصد به ۶/۷۹ درصد و از ۶/۴ به ۱/۷۸ کاهش یافت. پدیده جدایش نیز بطور موثری کاهش پیدا کرد. همچنین، خواص مکانیکی نوارها ارتقا یافت بطوری که: استحکام تسلیم، استحکام کششی و ازدیاد طول به ترتیب، ۱۳/۰۴ درصد، ۵/۸۳ درصد و ۴/۲ درصد بهبود یافتند.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
The ultrasonic energy field was applied during the twin-roll casting of 8011 aluminium alloy. The effects of ultrasonic vibration treatment on the microstructure and the mechanical properties of the 8011 strips were investigated by means of metallographic microscope observation, scanning electron microscope observation, electron backscattered diffraction and mechanical properties test. The average grain size of the strips decreased from ~90 mm to ~70 mm and the maximum density of texture decreased from 19.4 to 15. The content of Fe and Si in the precipitated phases decreased from 12.1% to 6.79%e6.4% and 1.78%, and the segregation phenomenon was restrained effectively. What’s more, the mechanical properties of the strips were enhanced: the tensile strength, yield strength and elongation increased by 5.83%, 13.04% and 4.2%, respectively.
محصولات مرتبط
بیومواد آلومینای چقرمه شده با زیرکونیا برای جایگزین مفصل
Advances in zirconia toughened alumina biomaterials for total joint replacement پیشرفت ها در بیومواد آلومینای چقرمه شده با زیرکونیا برای…
تولید ذرات ریز τ-MnAl با روش های مختلف A comparison of τ-MnAl particulates produced via different routes
A comparison of τ-MnAl particulates produced via different routes مقایسه ذرات ریز τ-MnAl تولید شده از طریق راه های مختلف…
اتصال نفوذی مس به فولاد زنگ نزن تحت فشار ناگهانی
Impulse pressuring diffusion bonding of a copper alloy to a stainless steel with/without a pure nickel interlayer اتصال نفوذی مس به فولاد…
آماده سازی ذرات آلومینای ریزدانه مشتق شده از ژیپسیت بایر Preparation of Fine Alumina Powder
Preparation of Fine Alumina Powder آماده سازی ذرات آلومینای ریزدانه مشتق شده از ژیپسیت بایر ABSTRACT This study involves the…
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.