زینتر کردن سنگ آهن
Iron ore sintering
چکیده
کارخانجات زینتر برای مخلوط کردن مواد معدنی جهت ایجاد ترکیب زینتر شده مناسب مورد استفاده بارگذاری در کوره بلند مورد استفاده قرار میگیرند. برای این منظور یک سری از عوامل باید لحاظ شوند، عواملی از قبیل ماهیت و ترکیب شیمیایی هر یک از اجزای معدنی درون مخلوط و همچنین شرایط روش تولید. زینتر کردن سنگ آهن نیازمند مشخصه یابی دقیق در آنالیز شیمیایی و گرانولومتری، تعیین فازهای معدنی در ساختار و شاخص های کیفی اعم از احیا پذیری، دمای تخریب (degradation به نظر منظور کاهش خلوص است، زیرا gradation به معنی افزایش خلوص است) پایین، تخریب احیا (reduction degradation) استحکام تمبلر است. به علاوه کارخانه زینتر بایستی دارای بهره وری بالا و ایجاد ترکیب زینتر شده با ترکیب شیمیایی و کیفیت همگن، جهت تسهیل فرایندی با حالت پایدار در کوره بلند باشد.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
Sinter plants have to process mineral mixes in order to obtain sinter of a suitable composition and quality to be loaded into the blast furnace. For this purpose a series of parameters need to be taken into account, such as the nature and composition of each component of the mineral mix and the conditions of the manufacturing process. Sinter is subjected to in-depth characterisation in terms of chemical and granulometric analysis, determination of the mineral phases in its structure and of quality indices such as reducibility, low temperature degradation, reduction degradation, and tumbler strength. It is also important to operate sinter plants with high productivity and to ensure a uniform sinter composition and quality so as to facilitate the steady state operation of the blast furnace.
محصولات مرتبط
ارزیابی عمق ترک با استفاده از تکنیک های جریان گردابی
Evaluation of crack depth using eddy current techniques with GMR-based probes ارزیابی عمق ترک با استفاده از تکنیک های جریان…
آلومینات ها Aluminates
Aluminates آلومینات ها ABSTRACT Aluminates form in binary systems with alkali, alkaline earth or rare-earth oxides and share the high…
انجماد جهت دار سوپرآلیاژهای پایه نیکل
Effect of solidification rate on competitive grain growth in directional solidification of a nickel-base superalloy انجماد جهت دار سوپرآلیاژهای پایه…
اثر کار مکانیکی بر ساختار آلیاژ منگنز آلومینیوم Effect Of Prior Working On The Structure Of Mn-29.5% Al-0.5% C ALLOY
Effect Of Prior Working On The Structure and Deformation Capacity Of Mn-29.5% Al-0.5% C ALLOY اثر کار مکانیکی اولیه بر ساختار…
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.