نقش ایریدیوم (Ir) در مقاومت به خوردگی داغ پوشش آلومیناید اصلاح شده با Pt-Ir در حضور نمک و در دمای k1173 .
Role of Iridium in Hot Corrosion Resistance of Pt-Ir Modified Aluminide Coatings with Na2SO4-NaCl Salt at 1173K
چکیده
فیلم های Pt-Ir (حاوی Ir با درصدهای ۰ و ۳۲ و ۴۶ و ۸۳ و ۱۰۰ درصد اتمی) توسط روش کندوپاش مغناطیسی (ماگنترون اسپاترینگ) بر روی سوپرآلیاژ تک کریستال بر پایه نیکل TMS-82+ رسوبدهی شدند. بعد از عملیات آنیل و آلومینایزینگ پوشش آلومیناید اصلاح شده با Pt-Ir عموما شامل فازهای و بودند. مقاومت به خوردگی داغ پوشش آلومیناید مختلف اصلاح شده با Pt-Ir توسط در معرض گیری دمای k1173 و با حضور نمک مورد ارزیابی قرار گرفتند. کمترین میزان حصول جرم (mass gain) به میزان بعد از h100 برای Pt-46Ir مشاهده شد، که باعث ایجاد یک پوسته حفاظتی پیوسته و چگال از بر روی سطح شد. تاثیر Ir بر روی مقاومت به خوردگی پوشش آلومیناید اصلاح شده با Pt-Ir از سه دیدگاه بحث شده است: استحاله فازی، تشکیل پوسته محافظ و نقش لایه غنی از Pt-Ir .
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
Platinum-iridium films (Ir ¼ ۰; ۳۲; ۴۶; ۸۳; ۱۰۰ at%) were deposited on the nickel-base single crystal superalloy TMS-82+ through magnetron sputtering. After annealing and aluminizing, the Pt-Ir modified aluminide coatings mainly consisted of PtAl2 and (Ni,Pt,Ir)Al phases. Hot corrosion resistance of the different Pt-Ir modified aluminide coatings was evaluated through exposure at 1173K with the Na2SO4+10 mass%NaCl salt coatings. The lowest mass gain (after 100 h) was observed for the Pt-46Ir aluminide coating, which formed the dense and continuous protective Al2O3 scale on the surface. The effect of Ir on the corrosion resistance of Pt-Ir modified aluminide coatings was discussed from three aspects phase transformation, protective scale formation and the role of a Pt-Ir enriched layer.
محصولات مرتبط
اثرات آنتی باکتریال فلزات Antibacterial effects of metals
اثرات آنتی باکتریال فلزات Antibacterial effects of metals اثرات آنتی باکتریال فلزات ABSTRACT In this chapter, the antibacterial effects of…
ارزیابی عمق ترک با استفاده از تکنیک های جریان گردابی
Evaluation of crack depth using eddy current techniques with GMR-based probes ارزیابی عمق ترک با استفاده از تکنیک های جریان…
تولید ذرات ریز τ-MnAl با روش های مختلف A comparison of τ-MnAl particulates produced via different routes
A comparison of τ-MnAl particulates produced via different routes مقایسه ذرات ریز τ-MnAl تولید شده از طریق راه های مختلف…
اتصال نفوذی مس به فولاد زنگ نزن تحت فشار ناگهانی
Impulse pressuring diffusion bonding of a copper alloy to a stainless steel with/without a pure nickel interlayer اتصال نفوذی مس به فولاد…
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.