Solidification crack susceptibility of aluminum alloy weld metals
حساسیت به ترک انجمادی در فلزهای جوش آلیاژهای آلومینیوم
ABSTRACT
The susceptibilities of the three aluminum alloys to solidification crack were studied with trans-varestraint tests and tensile tests at elevated temperature. Their metallurgical characteristics, morphologies of the fractured surface and dynamic cracking behaviors at elevated temperature were analyzed with a series of micro-analysis methods. The results show that dynamic cracking models can be classified into three types. The first model has the healing effect which is called type A. The second is the one with deformation and breaking down of metal bridge, called type B. The last one is with the separation of liquid film along grain boundary, called type C. Moreover, the strain rate has different effects on crack susceptibility of aluminum alloys with different cracking models. ZL101 and 5083 alloys belong to type A and type C cracking model respectively, in which strain rate has greater effect on eutectic healing and plastic deformation of metal bridge. 6082 alloy is type B cracking model in which the strain rate has little effect on the deformation ability of the liquid film.
جهت دانلود رایگان نسخه لاتین این مقاله اینجا کلیک کنید .
چکیده
حساسیت سه آلیاژ آلومینیوم به ترک انجمادی توسط آزمون های وارسترینت عرضی و کشش در دمای بالا مطالعه شد. خصوصیات متالورژیکی این آلیاژها، مورفولوژی های سطح شکست و رفتار ترک خوردگی دینامیک در دمای بالا با مجموعه ای از روش های میکروآنالیزی، تحلیل گردید. نتایج نشان می دهد که مدل های ترک خوردگی را می توان به سه نوع تقسیم نمود. مدل اول دارای اثر ترمیمی می باشد که نوع A نامیده می شود. مدل دوم، همراه با تغییرشکل و شکست پل فلزی است که نوع B نامیده می شود. مدل سوم همراه با جدایش فیلم مذاب در راستای مرزدانه است که به آن نوع C گفته می شود. بعلاوه، نرخ کرنش اثرات مختلفی بر حساسیت به ترک آلیاژهای آلومینیوم در مدل های مختلف ترک خوردگی دارد. آلیاژهای ZL101 و ۵۰۸۳ به ترتیب به نوع A و نوع C تعلق دارند که در آنها نرخ کرنش اثر بیشتر بر ترمیم یوتکتیک و تغییرشکل پلاستیک پل فلزی دارد. آلیاژ ۶۰۸۱ از نوع ترک خوردگی B است که در آن نرخ کرنش اثر کمی بر قابلیت تغییرشکل فیلم مذاب دارد.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
محصولات مرتبط
رسوب نشانی لایه های نازک زیرکونیای پایدار شده با ایتریا Yttria-stabilized zirconia thin films deposited
Yttria-stabilized zirconia thin films deposited by pulsed-laser deposition and magnetron sputtering رسوب نشانی لایه های نازک زیرکونیای پایدار شده با…
جوشکاری حالت جامد آلیاژ برنج و فولاد به کمک قوس پلاسما
Solid-state bonding of alloy-designed Cu–Zn brass and steel associated with phase transformation by spark plasma sintering جوشکاری حالت جامد آلیاژ…
سنتز پودر ZrB2 بوسیله احیا حرارتی بور ZrB2 Powders Synthesis by Borothermal Reduction
ZrB2 Powders Synthesis by Borothermal Reduction سنتز پودر ZrB2بوسیله احیا حرارتی بور ABSTRACT High-purity zirconium diboride (ZrB2) powders with submicrometer…
رفتار سینترینگ و خواص دی الکتریکی سرامیک ها Sintering behavior and dielectric properties of BaTiO3 ceramics
Sintering behavior and dielectric properties of BaTiO3 ceramics with glass addition for internal capacitor of LTCC رفتار سینترینگ و خواص دی…
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.