معیاری جدید برای شکل گیری ترک داخلی در ریخته گری پیوسته فولاد
A New Criterion for Internal Crack Formation in Continuously Cast Steels
چکیده
برای ارزیابی شرایط ترک دار شدن در ریخته گری فولادها به روش پیوسته یک مدل معیاری جدید برای تنش بحرانی شکست از کرنش های بحرانی مورد نظر اندازه گیری شده مفروض است، که می تواند بازه ی دمایی تردی و نرخ کرنش را تخمین بزند. تاثیرات بازه ی دمایی تردی و نرخ کرنش بر روی کرنش بحرانی برای شکل گیری ترک مورد ارزیابی قرار گرفته است.
هنگامی که بازه ی دمایی تردی و نرخ کرنش افزایش یابد، امکان شکل گیری ترک داخلی نیز افزایش پیدا می نماید که این امر به دلیل کاهش کرنش بحرانی می باشد. برای توصیف ویژگی های مدل ترمو مکانیکی ناحیه خمیری بین پایین ترین دمای استحکام (ZST) و پایین ترین دمای انعطاف پذیری (ZDT)، معیار حد تسلیم برای فلزات متخلخل که می تواند از استحاله دلتا/گاما تخمین زده شود، مورد استفاده قرار گرفته است. استفاده از معادله مناسب کرنش بحرانی و آنالیز ریزجدایش اندازه گیری شده اند و رفتار ترمومکانیکی ناحیه ی خمیری می تواند به طور موفقیت آمیزی با مدل پیشنهاد شده توصیف گردد که تاثیرات ریزجدایش در عنصر حل شونده و استحاله دلتا/گاما بر روی ترک گرم در حین انجماد در بازه ی ترکیب شیمیایی و نرخ های کرنش را در هم می آمیزد.
معیاری که برای ترک دار شدن مدنظر می باشد، اختلاف انرژی تغییر شکل در بازه ی دمایی تردی پیشنهاد شده می باشد که پدیده ی ترک دار شدن در تمام مقدار های کربن توضیح داده شده است.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
To estimate the cracking condition in continuously cast steels, a new model for critical fracture stress given from the measured critical strain has been proposed, which can take into account the brittle temperature range and strain rate. The effects of brittle temperature range and strain rate on critical strain for internal crack formation were analyzed.
When the brittle temperature range and strain rate were increased, the possibility of internal crack formation increased due to the decreasing critical strain. To describe the thermomechanical property model of the mushy zone between zero strength temperature (ZST) and zero ductility temperature (ZDT), the yield criterion for porous metals, which can take into accountd/gtransformation, was used. Using the fitting equation for the measured critical strain and the microsegregation analysis, the thermomechanical behavior of the mushy zone could be successfully described by the proposed model, which incorporates the effects of microsegregation of solute elements and d/gtransformation on hot tear during solidification at the given range of steel compositions and strain rates.
A cracking criterion based on the difference of deformation energy in the brittle temperature range is proposed to explain the cracking phenomenon of whole carbon range.
محصولات مرتبط
اثر عملیات حرارتی فولاد میکروآلیاژی بر خواص مکانیکی Mechanical Properties of a Microalloyed Steel
عملیات حرارتی فولاد میکروآلیاژی Effect of Intercritical Heat Treatment on Mechanical Properties of a Microalloyed Steel اثر عملیات حرارتی بین دماهای…
اهمیت خوردگی در خطوط ساحلی نفت و گاز corrosion in onshore oil and gas pipelines
Assessing the significance of corrosion in onshore oil and gas pipelines ارزیابی اهمیت خوردگی در خطوط ساحلی نفت و گاز…
بیومواد آلومینای چقرمه شده با زیرکونیا برای جایگزین مفصل
Advances in zirconia toughened alumina biomaterials for total joint replacement پیشرفت ها در بیومواد آلومینای چقرمه شده با زیرکونیا برای…
اثر اندازه نمونه بر ریزساختار و انجماد جهت دار فاز بین فلزی Al2Cu
Effect of sample size on intermetallic Al2Cu microstructure and orientation evolution during directional solidification اثر اندازه نمونه بر ریزساختار فاز…
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.