Sintering, consolidation, reaction and crystal growth by
the spark plasma system (SPS)
تفجوشی، شکل دهی، واکنش و رشد بلور توسط سیستم پلاسمای جرقه ای (SPS)
ABSTRACT
The graphite die set in spark plasma system (SPS) is heated by a pulse direct current. Weak plasma, discharge impact, electric field and electric current, which are based on this current, induce good effects on materials in the die. The surface films of aluminum and pure WC powders are ruptured by the spark plasma. Pure AlN powder is sintered without sintering additives in the electric field. The spark plasma leaves discharge patterns on insulators. Organic fibers are etched by the spark plasma. Thermosetting polyimide is consolidated by the spark plasma. Insoluble polymonomethylsilane is rearranged into the soluble one by the spark plasma. A single crystal of CoSb3 is grown from the compound powders in the electric field by slow heating. Coupled crystals of eutectic powder are connected with each other in the electric field.
جهت دانلود رایگان نسخه لاتین این مقاله اینجا کلیک کنید .
چکیده
قالب گرافیت قرار داده شده در سیستم پلاسمای جرقه ای (SPS) بوسیله یک جریان مستقیم پالسی گرما داده می شود. پلاسمای ضعیف،تکانه تخلیه، میدان الکتریکی و جریان الکتریکی که بر پایه این جریان استوار هستند، اثرات مناسبی را بر مواد القا می کنند. فیلم های سطحی آلومینیوم و پودرهای WC خالص، بوسیله پلاسمای جرقه ای، گسسته می شوند. پودر AlN خالص بدون افزودنی های تفجوشی در میدان الکتریکی، تفجوشی می شوند. پلاسمای جرقه ای، الگوهای تخلیه را روی عایق ها برجا می گذارد. الیاف آلی توسط پلاسمای جرقه ای، حکاکی (etch) می شوند. پلی ایمید ترموست، توسط پلاسمای جرقه ای شکل دهی می شود. پلی مونواتیل سیلان نامحلول، توسط پلاسمای جرقه ای به شکل محلول بازآرایی می شود. یک تک بلور CoSb3 از پودرهای ترکیبی توسط گرمایش آهسته در میدان الکتریکی، رشد داده می شود. بلورهای جفت شده پودر یوتکتیک، در میدان الکتریکی به یکدیگر متصل می شوند.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
محصولات مرتبط
نقایص جوشکاری Welding Defects
Welding Defects نقایص جوشکاری ABSTRACT Melting rate (resulting from selected welding parameters) and welding speed define the heat input. As it…
چاپ سه بعدی کامپوزیت کربن-کربن Three dimensional printing of carbon-carbon composites
Three dimensional printing of carbon/carbon composites by selective laser sintering چاپ سه بعدی کامپوزیت کربن/کربن توسط زینتر لیزر انتخابی ABSTRACT A…
مواد ایمپلنت سرامیکی Ceramic Implant Materials
Ceramic Implant Materials مواد ایمپلنت سرامیکی ABSTRACT Ceramics are refractory, polycrystalline compounds, usually inorganic, including silicates, metallic oxides, carbides, and various…
رفتار سینترینگ و خواص دی الکتریکی سرامیک ها Sintering behavior and dielectric properties of BaTiO3 ceramics
Sintering behavior and dielectric properties of BaTiO3 ceramics with glass addition for internal capacitor of LTCC رفتار سینترینگ و خواص دی…
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.