High temperature mechanical properties of as-extruded TiBw/Ti60 composites with ellipsoid network architecture
خواص مکانیکی کامپوزیت های TiBw/Ti60 دما بالای اکسترود شده با ساختار شبکه ای بیضوی
ABSTRACT
In this paper, the as-extruded TiBw/Ti60 composites with ellipsoid network architecture were prepared by powder metallurgy followed by hot extrusion. The high temperature tensile properties of the asextruded composites were studied in a temperature range of 923e1023 K. The ultimate tensile strength of the as-extruded 5.1 vol.% TiBw/Ti60 composites is increased by 22.0%, 21.2% and 11.4% compared with that of the matrix alloy at 923 K, 973 K and 1023 K, respectively. The excellent improvement in ultimate tensile strength can be mainly attributed to the ellipsoid network microstructure, load-bearing of TiBw and grain refinement. In addition, the elongations of the as-extruded composites are lower than those of the matrix alloy at all temperatures, and decrease with increasing the TiBw content. Fractograph analysis of the as-extruded composites indicates that TiBw fracture dominates the failure of the as-extruded composites at 923e973 K, while the fracture mechanism is predominantly controlled by interfacial debonding at 1023 K.
جهت دانلود رایگان نسخه لاتین این مقاله اینجا کلیک کنید .
چکیده
در این مقاله، کامپوزیت های TiBw/Ti60 اکسترود شده با ساختار شبکه ای بیضوی با متالورژی پودر و در ادامه اکسترود گرم تهیه شده اند. خواص کششی دما بالای کامپوزیت های اکسترود شده در دماهایی در محدوده K1023-923 مطالعه شده اند. استحکام کششی نهایی کامپوزیت های ۵.۱ vol% TiBw/TI60 با مقادیر ۲۲%، ۲۱.۲% و ۱۱.۴% به ترتیب در مقایسه با همان آلیاژ زمینه در K923، K973 و K1023 افزایش یافته است. بهبود عالی در استحکام کششی نهایی عمدتا می تواند به ریزساختار شبکه بیضوی، تحمل بار TiBw و اصلاح دانه نسبت داده شود. بعلاوه، افزایش طول کامپوزیت های اکسترود شده کمتر از آلیاژ همان زمینه در دماهای مختلف است و با افزایش میزان TiBw کاهش می یابد. آنالیزهای بررسی سطح شکست کامپوزیت ها اکسترود شده نشان می دهد که نواحی شکست TiBw به شکست کامپوزیت های اکسترود شده در دماهای K973-923 غلبه می کند درحالی که مکانیزم شکست عمدتا با شکستن پیوند مرزی در K1023 کنترل می شود.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
محصولات مرتبط
نقایص جوشکاری Welding Defects
Welding Defects نقایص جوشکاری ABSTRACT Melting rate (resulting from selected welding parameters) and welding speed define the heat input. As it…
اطلس عیوب ریخته گری
اطلس عیوب ریخته گری عیوب ریخته گری از گذشته در قطعات باعث بحران بوده اند و مهم ترین وظیفه ریخته گران…
روش های بازرسی در محل خط لوله برای تعیین خوردگی In-line inspection (ILI) methods for detecting corrosion
In-line inspection (ILI) methods for detecting corrosion in underground pipelines روشهای بازرسی در خط لوله برای تعیین خوردگی در خط…
سنتز پودر ZrB2 بوسیله احیا حرارتی بور ZrB2 Powders Synthesis by Borothermal Reduction
ZrB2 Powders Synthesis by Borothermal Reduction سنتز پودر ZrB2بوسیله احیا حرارتی بور ABSTRACT High-purity zirconium diboride (ZrB2) powders with submicrometer…
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.