ریز ساختار و خواص مکانیکی مس خالص تحت تغییر شکل شدید توسط پرس در کانال زاویهدار مساوی و پیچش با فشار زیاد
Microstructures and mechanical properties of pure copper deformed severely by equal-channel angular pressing and high pressure torsion
چکیده
مس خالص با درجه خلوص ۹۸/۹۹ درصد در دمای اتاق و توسط تکنیکهای مختلف تغییر شکل پلاستیک شامل پرس در کانال زاویهدار مساوی (ECAP)، پیچش با فشار زیاد (HPT) و ترکیبی از هر دو، تحت عملیات قرار گرفت تا همگنی در ریزساختار برای هر فرآیند و برای ترکیب دو فرآیند ارزیابی شود. با شروع با اندازه دانه در حدود ۶۰ میکرومتر، تغییر شکل پلاستیک شدید به ماده اعمال گردید. در حالی که ابعاد نمونه در طول فرآیند ECAP و HPT بدون تغییر باقی میماند، اما کاهش قابل توجه در اندازه دانه توسط میکروسکوپ الکترونی عبوری (TEM) مشاهده گردید. آزمایشهای میکروکشش و میکروسختی در نمونه تغییر شکل یافته در هر ۳ فرآیند انجام شد و همراه با کاهش قابل قبول در داکتیلیتی، بهبود قابل توجهی نیز در استحکام کششی ایجاد گردید.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
Pure Cu of 99.98wt.% purity has been processed at room temperature by diverse techniques of severe plastic deformation, namely equalchannel angular pressing (ECAP), high pressure torsion (HPT) and a combination of both in order to find out the evolution on the microstructural homogeneity for each of the processes and their combination. Starting with a grain size of ∼۶۰m, severe plastic deformation has been introduced to the material while maintaining the sample dimensions unchanged through the processes of ECAP and HPT. A significant decrease in grain size was observed by transmission electronic microscopy (TEM). Microtensile and microhardness tests were carried out on the deformed material in the three processing conditions. A significant improvement of the tensile strength was promoted with admissible penalization on ductility.
محصولات مرتبط
اثر میکروساختار ماده بر فرسایش ابزار هنگام ماشینکاری آلیاژهای سخت تیتانیوم
ماشین کاری آلیاژ تیتانیوم Experimental investigation on the effect of the material microstructure on tool wear when machining hard titanium alloys:…
ارزیابی عمق ترک با استفاده از تکنیک های جریان گردابی
Evaluation of crack depth using eddy current techniques with GMR-based probes ارزیابی عمق ترک با استفاده از تکنیک های جریان…
انجماد جهتدار آلیاژهای آلومینیوم – مس Directional solidification of aluminium–copper alloys
Directional solidification of aluminium–copper alloys انجماد جهتدار آلیاژهای آلومینیوم-مس ABSTRACT Directional solidification experiments have been carried out on different Al–Cu…
اثر افزودن کاربید تیتانیوم روی خواص ترموالکتریک سرامیک ها
Effect of titanium carbide addition on the thermoelectric properties of B4C ceramics اثر افزودن کاربید تیتانیوم روی خواص ترموالکتریک سرامیک…
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.