رفتار تبلور مجدد استاتیکی فولاد ضد زنگ ۳۱۶LN آستنیتی
Static Recrystallization Behavior of 316 LN Austenitic Stainless Steel
چکیده
تبلور مجدد استاتیکی فولاد ضد زنگ ۳۱۶LN آستنیتی با تست های دو مرحله ای فشار گرم با یک شبیه ساز ترمومکانیکی Gleeble-3500 بررسی شد. نمونه ها در دمای تغییرشکل ۹۵۰، ۱۰۵۰، ۱۱۵۰ درجه سانتیگراد و نرخ کرنش۰.۰۱ ۱s-1 ، ۰.۱ و ۱، کرنش های ۰.۱، ۰.۱۵ و ۰.۲، و بازه زمانی ۱-۱۰۰ ثانیه بررسی شدند. نتایج نشان داد که کسر حجمی تبلور مجدد استاتیک فولاد زنگ نزن ۳۱۶LN با افزایش دمای تغییر شکل افزایش، نرخ کرنش، کرنش و بازه زمانی افزایش مییابد که بیانگر این است که تبلور مجدد استاتیک تحت شرایط دمای تغییر شکل، نرخ کرنش، کرنش و بازه زمانی بالاتر، راحت تر انجام میگیرد. دمای تغییر شکل، اثر چشمگیری بر تبلور مجدد استاتیک ۳۱۶LN دارد.
کسر حجمی تبلور مجدد استاتیک به راحتی میتواند در دماهای تغییرشکل بالاتر، تا ۱۰۰% هم برسد. از آنالیز میکروسکوپی نتیجه میشود که هرچه کسر حجمی تبلور مجدد استاتیک بیشتر باشد، ریز شدن دانه ها آشکارتر است. سینتیک تبلور مجدد استاتیک ارائه شده است. کسر حجمی تبلور مجدد استاتیک در مقایسه با نتایج تجربی، هماهنگی داشته و به خوبی پیش بینی شده است.
جهت دانلود ترجمه تخصصی و فارسی این مقاله می توانید وجه آنرا پرداخت نموده و بلافاصله دریافت نمایید.
ABSTRACT
The static recrystallization of 316 LN austenitic stainless steel was studied by double-pass hot compression tests on a Gleeble -3500 thermomechanical simulator. The specimens were compressed at the deformation temperatures of 950,1050,1150℃, strainrates of 0.01,0.1, 1s-۱ , strains of 0.1,0.15,0.2, and intervals of 1-100s. The results show that the volume fraction of static recrystallization of 316 LN increases with the in crease of deformation temperature, strain rate, strain and interval, which indicates that static recrystallization occur seasily under the conditions of higher deformation temperature, higher strain rate and larger strain. Deformation temperature has significant influence on static recrystallization of 316 LN.
The volume fraction of static recrystallization could easily reach 100% at higher deformation temperatures. By microstructure analysis, it can be concluded that the larger the volume fraction of static recrystallization, the more obvious the grain refinement The static recrystallization activation energy of 317822 J/mol and the exponent n of 0.46 were obtained.The static recrystallization kinetics was established.The predicted volume fraction of static recrystallization is in good agreement with the experimental results.
محصولات مرتبط
اتصال Inconel 625 به UNS 32205 به روش جوشکاری پرتو الکترونی
Investigations on the structure – Property relationships of electron beam welded Inconel 625 and UNS 32205 بررسی روابط خواص-ساختار اتصال…
اثر نیتروژن روی خواص خزشی فولاد زنگ نزن
Evaluation of the effect of nitrogen on creep properties of ۳۱۶LN stainless steel from impression creep tests ارزیابی اثر نیتروژن روی…
ارزیابی عمق ترک با استفاده از تکنیک های جریان گردابی
Evaluation of crack depth using eddy current techniques with GMR-based probes ارزیابی عمق ترک با استفاده از تکنیک های جریان…
اتصال نفوذی مس به فولاد زنگ نزن تحت فشار ناگهانی
Impulse pressuring diffusion bonding of a copper alloy to a stainless steel with/without a pure nickel interlayer اتصال نفوذی مس به فولاد…
تنها اشخاصی که این محصول را خریداری کرده اند و وارد سایت شده اند می توانند در مورد این محصول بازبینی ارسال کنند.